JMB RetrofitsEM Tuning
Page 1 of 2 12 LastLast
Results 1 to 40 of 41
  1. #1
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036

    Breaking vf34 big turbo 8L s3, brakes etc

    As above, most conversion parts available, including jabbasport turbo kit with pro alloy FMIC, with new vf34 turbo modded by Jabba to fit, (clocked) as old turbo blew when oil line failed. Includes Pipewerx engineered down pipe to fit 4wd models and sports cat. All vgc, but intercooler does have a dent in the bottom from a bump, all was pressure tested and deemed fine to refit, not visible when fitted. Since has run fine for last 2.5 years and 5 k miles.
    Also Brembo 4 pot GT kit, front, with low miles EBC turbo disks / ferrodo ds2500 pads. Done about 6 k miles on discs and pads
    Neuspeed big rear arb kit plus R32 front arb, all painted black for stealth look! Adjustable rear wishbones by jabba. Possibly Bilstein B8s and H R springs also, again all pro painted black for stealth look.
    Miltek stainless exhaust, non resonated.

    Sachs organic sports clutch kit, for dmf. Less than 20 k miles and would hold 337 hp and 1.4 bar boost ok.

    Conversion was done for less than 20k miles following conversion by Jabba sport / APS.
    Parts located at APS in Brackley. Collection preferred due weight etc.

    Feel free to ask questions. All offers considered, job lot, split etc, but bear with as parts are being removed as we speak, car being reverted to standard.
    Last edited by simch; 31st March 2012 at 10:08.

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    S3Zek's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2011
    Posts
    407
    Hay mate could you pm me what you want for these parts.

    Neuspeed big rear arb kit plus R32 front arb, Adjustable rear wishbones by jabba.

    Miltek stainless exhaust, non resonated.

    Cheers

  4. #3
    Diesel Quattro's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Cheshire, UK
    Posts
    119
    Hi buddy, very interested in everything to for lowering i.e suspension, tie arms etc.

    Pm sent
    A3 Tdi Quattro 3Dr 51 Plate

  5. #4
    6th Gear

    Status
    Offline
    Join Date
    Feb 2008
    Posts
    2,818
    Pm'd bud.
    2000 AMK S3, Revo'd, forge 007p, B8's, H&R's, tarox g88's, ferrodo ds2500's, and in the fastest colour



  6. #5
    Wind Deflector Trend-setter

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Horsham
    Posts
    389
    Pm sent fella
    2000 Plate Audi S3 1.8T Santorin Blue - 261.0BHP - 255.1LB/FT on Custom Parsons Performance remap, Forge 007p DV, Red DogBush, Milltek non-res, Lowered 35mm Apex springs, Badger5 TIP/cone filter/heat shield, Powerflex'd, Large FMIC, Relentless Downpipe, Parsons Decat and lots of love.
    On gearbox number 4.
    Further modification to come..

  7. #6
    5th Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    bradford
    Posts
    1,252
    Hi mate how much for pads and discs pal
    350bhp & 316ftlb BBT new k16 7+7 blade hybrid turbo, Welly cooler, jetex filter, relentless ported v3 manifold 3" downpipe & de-cat, liquid gauge, r32 rear arb, AGU ported and polished Head, 550cc injectors, kw v2 Coilovers, s3dave tie bars & heat sheild, milltek cat back, I.E forged rods, brembos, inline fuel pump, v3 badger 5 tip, devils own WMI kit, AGU pistons, rear grooved discs & brembo pads, ds2500 pads & EBC ultimax disc, stack boost gauge

  8. #7
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    It's a full brembo gt kit, 4 pot calipers big discs and pads. 550 quid for the full kit, lots of meat on the pads only kit been on 20 k, these discs and pads were fitted less than 5 k ago. Fit under stock wheels.
    New with stock brembo discs is 1300 or so. They're great brakes.

    Pm s replied to, you can make offers too. Car began to be stripped this morning but will be getting photos etc if needed next week. Welcome to come and see them on the car on the ramp too, but be quick!

  9. #8
    1.8 Turbo

    Status
    Offline
    Join Date
    Mar 2012
    Location
    southampton
    Posts
    12
    Hi mate how much for the jabba turbo kit and rear neuspeed arb PM me cheers

  10. #9
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    Pms replied to.

  11. #10
    5th Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    bradford
    Posts
    1,252
    Hi mate I'm just after the discs and pads really mate already own the lcr brembos if they fir them thanks
    350bhp & 316ftlb BBT new k16 7+7 blade hybrid turbo, Welly cooler, jetex filter, relentless ported v3 manifold 3" downpipe & de-cat, liquid gauge, r32 rear arb, AGU ported and polished Head, 550cc injectors, kw v2 Coilovers, s3dave tie bars & heat sheild, milltek cat back, I.E forged rods, brembos, inline fuel pump, v3 badger 5 tip, devils own WMI kit, AGU pistons, rear grooved discs & brembo pads, ds2500 pads & EBC ultimax disc, stack boost gauge

  12. #11
    5th Gear

    Status
    Online
    Join Date
    Feb 2012
    Posts
    1,195
    How much for front arb mate? where are you located also? daz

  13. #12
    Reverse Gear

    Status
    Offline
    Join Date
    Jan 2010
    Posts
    18
    rear ARB if not already taken please

  14. #13
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    ARBS may have been taken just wating for confirmation that he can collect.

    I will update later with some prices and more info on the turbo kit as I am replying the same to many PMs!
    Just bear in mind everyone that this is going to be buyer collects from Brackley Northamptonshire, (near J10 M40) only and cash on collection.
    I wont be splitting the discs and pads from the Brembo kit, it is the full kit only, sorry.

  15. #14
    Neutral

    Status
    Offline
    Join Date
    Mar 2012
    Posts
    52
    How much for the turbo kit?

  16. #15
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    £1000 for the turbo kit, incl turbo, new oil feed line , TIP, ProAlloy FMIC and piepwork, injectors and manifold and stainless DP/Cat.
    Turbo is a VF34 with 18 housing. Was bought to replace blown Vf34, and advertised as "new" but actually had been removed from a new Subaru by Tegsport that they were prepping for rallying. I had it checked at Jabbasport, then split, clocked and reassembled and a new modified oil line supplied. It's not been fitted tot he car as the car is now being returned to stock for sale.
    All the other turbo kit parts were fitted by Jabba and done less than 20k miles. Car ran very well in that time prior to the oil feed problem.

  17. #16
    Reverse Gear

    Status
    Offline
    Join Date
    Apr 2012
    Posts
    4
    Hi mate, will the 3" downpipe & sports cat fit the mk1 TT?
    What price are you after?
    Cheers - Steve

  18. #17
    voorhees's Avatar
    Moderator

    Status
    Offline
    Join Date
    Dec 2005
    Location
    Leafy Warwickshire
    Posts
    14,920
    Simch...that's a blast from the past,how's the Roadster ?

  19. #18
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    Roadster...? What was i on about with that then? My soft top porker?? Still got that!

  20. #19
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    I have some wheels off this car too, both minty sets, of BBS split rims. 8.5j BBS RWii, Pillar box red centres and silver powder rims! Also a set of BBS RXii anthracite centres and powder silver rims, (TT fitment, Audi part numbers on them of course).
    Will get some more details and pictures of them as soon as I can.
    All pretty much mint, no kerbing etc, I think there is a tiny chip on one of the silver rims on the RX11s but that's about it.

  21. #20
    voorhees's Avatar
    Moderator

    Status
    Offline
    Join Date
    Dec 2005
    Location
    Leafy Warwickshire
    Posts
    14,920
    Quote Originally Posted by simch View Post
    Roadster...? What was i on about with that then? My soft top porker?? Still got that!
    Doh !
    Had you mixed up with Silver75 :/

  22. #21
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    I thought you meant the Roadster guy who had that lovely exhaust job done in the West Mids...!! !

    Just re read that thread and link to TT forum. Comedy gold!

    You're right though it is a bit of a blast from the past!!

  23. #22
    Neutral

    Status
    Offline
    Join Date
    Mar 2012
    Posts
    52
    Quote Originally Posted by simch View Post
    £1000 for the turbo kit, incl turbo, new oil feed line , TIP, ProAlloy FMIC and piepwork, injectors and manifold and stainless DP/Cat.
    Turbo is a VF34 with 18 housing. Was bought to replace blown Vf34, and advertised as "new" but actually had been removed from a new Subaru by Tegsport that they were prepping for rallying. I had it checked at Jabbasport, then split, clocked and reassembled and a new modified oil line supplied. It's not been fitted tot he car as the car is now being returned to stock for sale.
    All the other turbo kit parts were fitted by Jabba and done less than 20k miles. Car ran very well in that time prior to the oil feed problem.
    Would you sell without the fmic? I'm already running a large fmic.

  24. #23
    Neutral

    Status
    Offline
    Join Date
    Feb 2012
    Posts
    68
    PM'd you.

  25. #24
    6th Gear

    Status
    Offline
    Join Date
    Feb 2008
    Posts
    2,818
    Have you any of the pics yet for the above?
    2000 AMK S3, Revo'd, forge 007p, B8's, H&R's, tarox g88's, ferrodo ds2500's, and in the fastest colour



  26. #25
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    No pics yet, car not stripped yet.

    Will have some this week asap.

  27. #26
    slydog18's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Jul 2011
    Location
    Luton, U.K.
    Posts
    139
    How much for the RXii's? Are they with tyres, 18's or 17's and 5x100 PCD?
    N88 GGY
    2002 Noggy Blue S3
    With Beige Alcantara and Black Leather
    18 x 8.5 Mercedes Eltanin Alloys, 225/40 18 Tyres, 20 front and 25mm rear PCD Adapters,AP Coilovers,
    Revo Stage 2 Map, Relentless V3 Manifold, 3" Downpipe, Custom Decat, QST Milltek Catback Exhaust, 80mm R-Tech/SFS TIP,
    S2000 Air Filter, Forge FMIC, Forge 008p DV, N249 Delete, Competition Clutches 6 Paddle Clutch with Single Mass Flywheel,

    Gti International 2013:- 1/4 mile - 13.52s

  28. #27
    Diesel Quattro's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Cheshire, UK
    Posts
    119
    Quote Originally Posted by slydog18 View Post
    How much for the RXii's? Are they with tyres, 18's or 17's and 5x100 PCD?
    i am also intrested in the BBS wheels

    aaron
    A3 Tdi Quattro 3Dr 51 Plate

  29. #28
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    I will get some pics up and prices and details etc.
    The RXiis have tyres, falken 452s, all legal I think 5mil or so but will check. 225/40/18

    The Rwiis have Goodyear F1s, 3k miles only, in 235/40/18, look big and chunky on the 8.5j rims.

    I will get some pics, just a bit mad this week and am not near the car just now. Will be back later in the week, sorry!

  30. #29
    Neutral

    Status
    Offline
    Join Date
    Mar 2012
    Posts
    38
    Has the Milltek gone yet?

  31. #30
    Wind Deflector Trend-setter

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Horsham
    Posts
    389
    How much separately for:

    -Milltek non res
    -Sports cat
    -Downpipe
    -FMIC with piping if Dan1720v is buying the rest?

    And.. What sort of deal would you do for the lot? Collection not an issue. Pm if needs be. Cheers
    2000 Plate Audi S3 1.8T Santorin Blue - 261.0BHP - 255.1LB/FT on Custom Parsons Performance remap, Forge 007p DV, Red DogBush, Milltek non-res, Lowered 35mm Apex springs, Badger5 TIP/cone filter/heat shield, Powerflex'd, Large FMIC, Relentless Downpipe, Parsons Decat and lots of love.
    On gearbox number 4.
    Further modification to come..

  32. #31
    Gops's Avatar
    6th gear @7000rpm

    Status
    Online
    Join Date
    Nov 2009
    Location
    Coventry
    Posts
    2,641
    Interested in the brake set up.. Pm'd
    Quote Originally Posted by <tuffty/> View Post
    its either mapped or broken...

  33. #32
    Gops's Avatar
    6th gear @7000rpm

    Status
    Online
    Join Date
    Nov 2009
    Location
    Coventry
    Posts
    2,641
    Also does the kit include the hoses?
    Quote Originally Posted by <tuffty/> View Post
    its either mapped or broken...

  34. #33
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    PMs replied to, and yes, Gops, the hoses are included.

    cheers

  35. #34
    Gops's Avatar
    6th gear @7000rpm

    Status
    Online
    Join Date
    Nov 2009
    Location
    Coventry
    Posts
    2,641
    Cheers matey. Make sure you email me with the photo and send me the postcode so I make it there on Sunday!
    Quote Originally Posted by <tuffty/> View Post
    its either mapped or broken...

  36. #35
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    Few getting one of the lines off to sort out fella, will have to be next week if they can do it. I pm d you.

    Sorry

  37. #36
    Gops's Avatar
    6th gear @7000rpm

    Status
    Online
    Join Date
    Nov 2009
    Location
    Coventry
    Posts
    2,641
    Yeah got the pm mate. Let me know when I can pick them up. Also was interested in the shocks and springs.. Price on them?
    Quote Originally Posted by <tuffty/> View Post
    its either mapped or broken...

  38. #37
    slydog18's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Jul 2011
    Location
    Luton, U.K.
    Posts
    139
    any news on the wheels yet?
    N88 GGY
    2002 Noggy Blue S3
    With Beige Alcantara and Black Leather
    18 x 8.5 Mercedes Eltanin Alloys, 225/40 18 Tyres, 20 front and 25mm rear PCD Adapters,AP Coilovers,
    Revo Stage 2 Map, Relentless V3 Manifold, 3" Downpipe, Custom Decat, QST Milltek Catback Exhaust, 80mm R-Tech/SFS TIP,
    S2000 Air Filter, Forge FMIC, Forge 008p DV, N249 Delete, Competition Clutches 6 Paddle Clutch with Single Mass Flywheel,

    Gti International 2013:- 1/4 mile - 13.52s

  39. #38
    S3Zek's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2011
    Posts
    407
    Cheers for the bits mate, traffic was fine, all parts good and fitted... Committed lol

  40. #39
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    Wheels will be a couple of weeks and I need to source some tyres for the stock ones to replace and need to keep the car rolling whilst in the workshop.

    Happy Easter everyone.

  41. #40
    6th Gear

    Status
    Offline
    Join Date
    Feb 2004
    Posts
    2,036
    One set of wheels are now up on "the bay", do a search if you like to see photos, they are the BBS RWii s, red centres.
    Feel free to bid there if intertested, or can see them there and contact me on here for offers etc. They are pretty mint tbh and top notch tyres, (note 235/40/18 though, to allow 60+ in second!)
    Still have the others too, not 100% on whether I will be able to sell them, bus as soon as I know for sure, I'll let those intertested know.

    The others are anthracite centres, silver powder rims, 8j, and are BBS RSii, (not RCii as I think I said previously). Sorry for the error. Again, they are pretty much perfect, with decent 225/40/18 falken 452s. Will update on the RSiis asap.
    Thanks for being patient all those interested in bits.
    Quick update on parts gone, ARBS, bottom arms and Miltek cat back gone. Brembo kit gone, Bilstein and HRs gone.
    Still have the turbo kit, incl intercooler, DP and cat, and also still have the sachs organic clutch kit, 20k miles.
    cheers

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Valuation on my parts, Big Turbo conversion and other tasty mods,
    By Jordysport in forum A3/S3 Forum (8L Chassis)
    Replies: 3
    Last Post: 9th November 2011, 18:23
  2. IHI VF34 Conversion Pics
    By HTC in forum A3/S3 Forum (8L Chassis)
    Replies: 204
    Last Post: 4th October 2010, 20:07
  3. big turbo conversion what whould you do?
    By S3 GEORGE in forum A3/S3 Forum (8L Chassis)
    Replies: 19
    Last Post: 11th April 2008, 16:22
  4. Cracked Manifold Big Turbo Conversion S3
    By jo3y in forum A3/S3 Forum (8L Chassis)
    Replies: 1
    Last Post: 11th April 2008, 13:47
  5. Big Turbo Conversion (330BHP) 3,500 Fitted
    By Stewart in forum A3/S3 Forum (8L Chassis)
    Replies: 17
    Last Post: 2nd April 2007, 17:51

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO