Fuses are ok, at back of rnse, end of dash and engine bay.
You can hear the disc attempting to spin, but no lights illuminate etc.
Pins all straight on back of rnse.
Inside is all ribbons. I doubt these can be picked up anywhere incase broken circuit inside? Only ones I can find on eBay are DVD drive and display ones. But that would not explain the lack of illumination from the buttons or it not turning on.
I also noticed I need to add an earth into the pin 7 on blue connector as mine has Bose so will order a connector. This won't affect the current problem though.
TBH if mk1 was working fine before, then either the mk2 has faults or you've damaged/made a mistake on conversion, was the TT unit tested before fitting?
Not a problem anymore I've managed to sort it and get all working tested every ribbon and think one must have been loose or installed the wrong way round. Also got the ami loom from kufatec rather than wiring into cars loom.
Not a problem anymore I've managed to sort it and get all working tested every ribbon and think one must have been loose or installed the wrong way round. Also got the ami loom from kufatec rather than wiring into cars loom.
I'm having the exact same problem I can here the fan spinning etc but no display, also what loom are you talking about so i can try that aswel, as for the ribbons did you just take the whole unit apart and reconnect everything?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.