AH FabricationsMonster Motorsport
Page 3 of 4 FirstFirst 1234 LastLast
Results 81 to 120 of 138
Like Tree2Likes

Thread: Lëon OEM+

  1. #81
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    now that the car is running, it's time to tidy up a few bits on the car

    Cable tied the main battery cable through the car along the side rails

    and tidying up the white bits in the shell

    After taking out all the sound deadening, there are white bits in the shell...which is odd as some other stripped out leons of the same age have a fully sprayed shell

    Before



    After



    Bit patchy and needs another coat, but will do this later

    Carbon coil cover refitted



    Gave the engine bay a 10 minute clean over

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #82
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Just ordered these

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  4. #83
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    As I have removed the whole plastic gaitor off the handbrake I needed a new grip for the handbrake.

    Ordered these, retro green BMX grips

    Going to fit these later. Stupidly for some reason I am excited about such a small thing

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  5. #84
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    fitted

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  6. #85
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Thought I would show her some love today.

    Snow foamed drained



    Then I clayed the whole car, polished, cleaned the glass and finished off sealing her with R222 Carnauba wax

    not bad for a 12 year old car....

    [img]http://farm8.staticflickr.com/7369/9059582873_2464d11859_c.jpg/img]



    Interior





    Bucket Seat

    [img]http://farm6.staticflickr.com/5498/9059591653_97c2768dab_c.jpg/img]




    Probably one of the comfiest bucket seats ever, love it



    Wires are a mess around the drivers console, making a custom mouting bracket and tucking the rest of the wires



    Stripped out boot, and a decent picture of the battery relocation



    3" 5 point Schroth Harness



    http://farm6.staticflickr.com/5542/9...87704a7a_c.jpg

    Essential fire extinguisher, and going to spray the floor black also to tidy it up



    Appropriate sticker



    Cut up front end for more flow



    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  7. #86
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    New N75 valve arrived today. Hopefully this will sort the erratic boost issues out, sometimes it's 1.5bar and sometimes it's 0.8bar actuator pressure

    Also got a vag com error showing intermittent connection from the N75 valve

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  8. #87
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Water meth now fitted thanks to Richard Ellis at Dyno Daze custom worx



    Mapping is now commencing.

    Car felt good up on the way to the mapper, upset a Nissan 350z while doing...erm, naughty speeds
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  9. #88
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    So the car is now finished, and I am seriously chuffed with the results

    it was 285bhp with 287lbft at 1.3 bar and with water meth 290bhp.

    it was flowing 250bhp on less than one bar on actuator pressure alone...normally the CR Turbo units have to be worked hard to flow, but this is working seamlessly

    The little K03 hybrid was reaching it's limit, not to mention the rods also, due to the spikey nature of a KKK turbo we are playing it safe. The turbo "could" flow over 300bhp, but then it's squeaky bum time for if the engine stays in one piece.

    Power is now awesome, right across the rev range up to the redline, it's still holding 1.2bar.

    Bare in mind we had to push the turbo at 1.5/1.6 bar to get 264bhp.....it wasn't flowing. Now since with the SFS supersize TIP, 3" downpipe, decat and water meth it has gained almost 30bhp. The mapper reported that the supersize TIP really helped to unleash the power.

    Here are the graphs:

    Figures:



    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/479B93C6-C034-453F-811E-3B6139B1C322-8155-0000052D67F3EB6F_zps78059da4.jpg[/img

    seriously seriously chuffed with the result as I wasn't expecting much more than 280bhp at the most.
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  10. #89
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Went to GTI International yesterday. Now bare in mind that I have not done a 1/4 mile for at least 8 years when I had my MK3 Ibiza Cupra.

    The weather was red hot all day (burnt) and made for some challenges on the strip, but fortunately water meth was helping here

    I started off running a 14s 1/4 mile, then got into the 13's, and my very last run of the day pulled a 13.4 with a terminal speed of 108mph

    To say I am chuffed is an understatement, especially as I am running nankangs (from the previous owner still on the car) and with a 40 profile tyre.

    I was 0.1s slower than the fastest Seat of the day, so just missed out on getting the fastest seat prize

    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/9A931045-C302-477E-A7AD-4FE2ECD39942-1448-000000E2CA5EA70F_zps903f96ed.jpg/img]





    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  11. #90
    Dean_T's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    May 2004
    Location
    West Mids
    Posts
    523
    Great read.

    With that kind of power and stripped out I bet that thing certainly moves!
    Dean.

  12. #91
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Found this pic

    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/86597BD3-5D30-4A51-966C-9E63AE9AB39E-1044-000000DA69BBD62E_zpsefc09075.jpg/img]

    Concentrating on tidying things up on the interior now, as I have not been happy with it for a while

    There were bits of carpet like fluff stuck to a few body panels after taking out all the sound deadening which looked messy

    rear inside arch cleaned



    There was a whole thick line of it stuck here also, all removed



    I am prepping the floor and cleaning the last few bits of glue off, ready to spray it satin black

    Passenger side done

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  13. #92
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Here is the progressive DO controller

    I went for the advanced setup with the power, pump warning light and float sensor.

    definitely worth having as when driving I can keep an eye on what the kit in the boot is doing, making sure everything is running safe. Worked well already the other day with the float sensor telling me the meth was low, flashing in front of me and doing it's job. Worth every penny



    Power on

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  14. #93
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    So....

    just ordered some of these, plans to follow



    My spare engine mounts turned up today also. These are going to be home brewed, with the original rubber drilled out and then fully filled with a hard resin.

    It's either I pay £240 for a set of race mounts from Awesome GTI, or like I am doing, I picked up a set of 2nd hand mounts for £20 and buying some resin for £30.....I'm going for the home brew version
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  15. #94
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    These got delivered today, ready for the home brew track mounts



    Just picked these up

    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/04C65DD8-5C1F-43DC-ACBA-8C18B0F57FF4-1690-000001303F58C2C8_zps3386841c.jpg[/ig]
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  16. #95
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Went out for a run last night and thought I would get a few videos up of 3rd and 4th gear acceleration

    50-100 3rd gear pull





    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  17. #96
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    These arrived as well

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  18. #97
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Did a bit of work yesterday

    Rear bumper off, and cut...



    Stupidly when putting the ports into the bumper, I didn't cut them short enough and they fouled along the crash, so they had to come out again, and re-cut which put me back an hour

    Resprayed the rear crash bar, but I think I am just going to remove this, as its getting in the way of the drilled holes

    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/90723A67-75E9-47D5-A12D-A41EC9067C3E-144-00000005348C7689_zpse5cc36ab.jpg/img]

    Work in progress



    Trial fitted the 15mm spacers also

    Before:



    After:

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  19. #98
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Few bits done today

    Cleaned it with this:




    I haven't been impressed with Meguiars gold class for a while, so someone suggested to use this and I am really impressed with it. Cut through the dirt really well, and it smelt LUSH!

    Snow foamed as always, final bit of draining:



    Then gave the car a quick claying, and worked on a few stickers I have been meaning to get on

    [img]http://i253.photobucket.com/albums/hh67/jamiebennett81/59CBD570-7524-4EA9-B1A6-2F38B9E1C1EA-231-0000000C38FE2B9D_zps78840a5e.jpg/img]

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  20. #99
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Resin arrived for the engine mounts

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  21. #100
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,355
    Looking really cool Tony!

    Hurry up and get a pax seat so we can go for a blast!
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  22. #101
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Quote Originally Posted by Prawn View Post
    Looking really cool Tony!

    Hurry up and get a pax seat so we can go for a blast!
    Cheers mate, I will try, but prob won't be till at least early next year.

    Just finished off fitting the 15mm spacers all round, bit of poke at the front, will look great with the camber top mounts on
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  23. #102
    Vex182's Avatar
    Guess what I drive...

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Hinckley
    Posts
    878

    My Social Networking

    Add Vex182 on Facebook
    Love the car mate, very good work!
    Silver 2002 Audi S3 225 (BAM) since March 2011.

    Mods: Badger5 2.2 TIP, Jetex filter, PCV delete, 710 DV, Standard N249 in use, R-Tech Stage 1 TiV Remap, Audi TT Pedals, Red Dogbone, Polybushed tie arms. All silicone boost pipes, Michelin PS3s, Red V6 coil packs, MK4 flat blade conversion, retrofited cruise control.
    Currently: 254bhp - 276lb/ft (174bhp/ton) as of 11/02/2013 On V-Power

  24. #103
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Quote Originally Posted by Vex182 View Post
    Love the car mate, very good work!
    Thanks mate, it's getting there slowly Finished fitting the spacers last night at 11:30, although delayed while Mr Prawn came round to pick up a spare set of hubs. I think the neighbors must think I am mad, pitch dark with a decorating light, almost midnight working on the car ha ha!! Wheels sitting flush now. The whole stance of the car

    is starting to look great now

    and here is a very over processed picture lol

    Prawn likes this.
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  25. #104
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Ordered this today



    Did a few hours research on a half decent, cheap camera, this one seems to have come out best, so just waiting on delivery now, excited!
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  26. #105
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,355
    Looks Cool Tony. Are you coming to the Forge day on Saturday mate>?
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  27. #106
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Quote Originally Posted by Prawn View Post
    Looks Cool Tony. Are you coming to the Forge day on Saturday mate>?
    No sorry mate, I'm not as I'm busy.....think the next thing I will be going to is the AMD day in November, pretty busy for all the other events coming up
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  28. #107
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Quick trip to Sainsbury's today, I mean literally its a mile down the road, but just needed to move it off the drive!!

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  29. #108
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    These arrived today

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  30. #109
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    So did a few bits on the car tonight.

    Ever since losing the weight in the car, especially over the rear, the rear feels twitchy, which doesn't inspire me with confidence.

    So looking at the ARB, its on the medium setting, so I have set this to its softest setting.

    drivers side bolt off



    set on its softest setting



    Passenger side bolt off, this was quite a bit more difficult to get off, but the pro wrench made quick work of that



    Bolts soaked in WD40 and copper greased, all re-tightened and done, didn't take too long in the end

    Next is the interior wires, as it's driving me mad with them all lying about looking untidy. I also made a mount for the TCS anf fuel cap release button, but still haven't got round to mounting it yet, because the wires need sorting.



    Wires spliced, and pulled apart, ready to be tucked, some remaining round the back and the TCS and fuel button to be pulled through the middle ready to be mounted



    Then noticed this metal plate, holding in wiring from the old heavy leather seat which went a long time ago



    quickly unbolted and gone



    next up is to actually put the wires around the back, then get round to doing the engine mounts and filling with solid resin....

    hopefully more updates on Sunday
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  31. #110
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Longer bolts and washers arrived today ready for the old Skool mod of raising the rear of the bonnet

    Some say this will work to release heat, others say it will let air in and lift the car

    Well this mod has only cost me about £3 so if it doesn't work then no big deal

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  32. #111
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Few bits arrived today

    On board camera for the leon to get some decent HD footage! it's tiny, but looks awesome. Will hopefully get a test video done on Sat evening!







    and finally new nuts and bits to hold on the front half moon shape attachments which cover the toe bar holes, so the front end is a bit more tidier

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  33. #112
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Shipping out all the camber mounts at the moment, 14 arrived in red, and one came in black for some reason....I'm going to take the black ones as they look really smart



    Started work on the engine mounts today, in preparation to be fitted next weekend along with the camber mounts.

    These mounts are oil filled one side, which makes a right mess when cutting this out and draining the oil in it.



    Next up is to get the mount done for the TCS and Fuel buttons

    measured up and drilled



    After some fiddly cutting



    other hole cut and trial mounted



    The plate is to be braced either side, sprayed black, then the edges rounded off with a rubber fitting



    Mounts filled



    the one on the right leaked slightly, giving an uneven finish, but it can be cut into shape or just left as it doesn't really matter

    Oil sides of the mounts filled and done





    All the cables have also been tucked behind the center console, ready for the floor to be sprayed black



    Next up is to start installing the oil pressure/temp and volt gauges.....
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  34. #113
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    ASN stickers arrived today :D

    will get them on and fitted tomorrow, then off to prawn HQ on Sunday to get the top mounts and engine mounts fitted
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  35. #114
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    So a few upgrades and changes.

    The HD camera I got was bloody awful, so that has been sent back and I am now looking at 2nd hand go pro's. Although I bought a cheap phone holder from halfords yesterday, made it stiffer with lots of cable ties, and its actually not that bad, so for £17 Vs £120, it will do for now

    Went to Prawn HQ today to get the solid top mounts and solid engine mounts fitted

    early start and arrived there for 09:00...





    The OEM mounts on the Leon aren't damped at all, as you can see from the one on the right. The Audi TT ones are damped, but does not matter as these have had their oil emptied and filled with the hard resin



    Passenger side one fitted



    Although a few issues when fitting this. The bolt for the Neuspeed ARB snapped clean off, clearly on its way out



    Nick then tried drilling it out, but his drills were blunt. So I have the task of drilling it out then tapping it from an 8mm piece Nick has lent me



    We then went to do the drivers side, and upon taking out the OEM top mount, the bearing literally fell apart, with ball bearings rolling about on the floor. By a stroke of luck, Nick had a OEM spare one, phew!





    As for the test drive, the tracking needs sorting, but it feels great now. We found the passenger side engine mount slightly loose when changing it, so this is now all sorted.

    There is a lot more engine vibration into the cabin and gearbox whine, but the car feels really really good now. It feels planted, turn in is great, and this is the first time in a long time it feels like it is handling as it should. Very very happy indeed.

    Big thanks to Nick. Few things to sort now, like the tracking and ARB bolt, but nothing major.
    Last edited by jamiebennett81; 29th September 2013 at 13:56.
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  36. #115
    Dean_T's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    May 2004
    Location
    West Mids
    Posts
    523
    Sounds like it was a day full with surprises.
    Dean.

  37. #116
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Quote Originally Posted by Dean_T View Post
    Sounds like it was a day full with surprises.
    Yes Luckily, in Nicks Aladdins cave AKA his garage, we had spares to get the job done.
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  38. #117
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    Fitted the ASN stickers today also







    Finally tidied up the front with the bumper toe hole inserts







    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  39. #118
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    So a few bits

    Thanks to a guy on one of the car groups, he got me the OEM bolts for the gearbox mount, so I can replace the crappy cut down bolts that have been bodged



    Ordered the new bolts for the snapped ARB bolt. Just need to get a 9mm tap and 9mm drill piece

    and these are on there way too. BBS RB 17" 8j wide, to be wrapped in semi slicks, ready for 1/4 mile and track days. Will be refurbished in a satin black. Need to find some centre caps for them....not seen many of these wheels about so that could be challenging. (got them for a bargain at £90)

    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  40. #119
    jamiebennett81's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2008
    Posts
    218
    another wheel shot, these are going to be redone in black, and used for the track only, wrapped in a set of slicks
    2001 Seat Leon Cupra. 291bhp 13.4 1/4 mile @ 108mph.

    Click the picture below for my build thread.


  41. #120
    RobinJI's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Chard, Somerset
    Posts
    147
    Looks good mate. Nicks garage is definitely an Aladdins cave isn't it! Looks like a lot of time and effort's gone into the car, I bet it's a good laugh now.

    With the camera, I didn't fancy the price-tag of go-pros so went with Sony's version (link). Very happy with it. Films 1080 at 30 and 60fps and 720 at 120fps. It's got the option of a 170deg lens angle, or cropped down to 120 but still at 1080, with the option for it to use the cropped area to automatically steady the shot. Waterproof down to 60m like a go-pro, plus it mounts on a standard 1/4" tripod thread. Picture quality seems really good, even in quite dark conditions, and it's handled sudden changes in light when mountain-biking in and out of woodland really well.

    This video of Nick at Combe was taken on it, this is straight off the camera, you can see the steadying working from his bonnet moving around, the camera was solidly mounted to the screen (ignore the rattling noise, that seems to be the mount):

    1.8 20v turbo converted '88 Scirocco - ASN Build Thread

 

 
Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. buy a bike or build a track car?
    By Syvo in forum General Chat
    Replies: 17
    Last Post: 21st April 2011, 21:18
  2. A3/S3 kick builds
    By will_S3 in forum In-Car Entertainment
    Replies: 0
    Last Post: 6th June 2003, 13:55
  3. Donnington Track Day
    By Joshie in forum Major UK Events
    Replies: 14
    Last Post: 27th February 2003, 19:07
  4. Tracking Systems
    By Jack829 in forum General Technical / How To
    Replies: 0
    Last Post: 20th February 2003, 11:54
  5. Donnington Track days
    By Simon in forum Other Brands & Models
    Replies: 14
    Last Post: 13th January 2003, 15:56

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO