Chris NottSky Insurance
Page 5 of 7 FirstFirst 1234567 LastLast
Results 161 to 200 of 242
Like Tree5Likes

Thread: Chins A4 - S Line content.

  1. #161
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Cheers !

    I havent done much to it lately due to other things so no updates im afraid ! Ive got a few bits and bobs planned for edition though

    As for the noise, i haven't fitted any valves or anything - the whoosh sound is just the vanes in the turbo opening/closing You can hear it more if you (like me) drill the bottom of the air box and remove the silencer and backbox , it sounds even louder if you remove the car as well

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #162
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    Dude, iv just read through this again as I'm looking at doing some more stuff to mine too, how bad was it getting the rear rubber perches out? I might want mine doing but my adjusters sit on top of the spring with the AP's so not sire if I can, is it rattly or harsh ride without the rubbers in?
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  4. #163
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Hi mate, to get the bump stops out you need to put the car on axle stands on both sides , jack up the rear axle on one side, undo the big bolt which holds the damper in place at the bottom, get the jack out and let the axle drop then do the same on the other side. Then use some spring clamps to compress the spring and yank it out , take the bump stop out and put the spring back in. It will feel a bit loose but it will position itself as soon as you drop the car back onto the floor If your adjusters sit on top of the spring then just get rid of them as well I didn't notice any difference in ride quality tbh

  5. #164
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    Nice one mate, that's what I'll be getting done then but I won't be doing It cos I'm abit pants at all that stuff and have very limited tools.

    Wonder if a garage would even get what I mean? The rubber stops sit under the springs then yeah?

    You get my text other day?
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  6. #165
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    As for pictures, here's one my friend took on Sunday


    She'll be getting the whole front end resprayed around October/November time before i take her off the road during winter


    185521_10150267028548177_515638176_7770131_4839806 _n by Chin., on Flickr

  7. #166
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Was it you that txt me then ? Sorry mate my phones been dodgy and had all the numbers deleted off it ! Ill txt you back in a minute

    The rubber bit sits on top of the spring then the adjuster cup sits on the bottom That's how i fitted it anyway when i've put the coilovers on I think if you go to a garage then they should be able to sort you out however go to a backstreet garage or something coz i think i garages like kwik fit etc might not want to get involved.

    Im happy to lend a hand if you fancy a trek up north !

  8. #167
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    Mine is the other way round, my adjuster is on top an the runner mount on the bottom, I spoke to a guy at DPM who said that was right, I could come up at some point and we have a look at it, you'd have to send me your post code so I know how far apart we are.

    Thanks man.
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  9. #168
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Well i couldnt have fitted mine in any other way , i had to fit the adjuster cup to the bottom so it sits on top of the axle and is secured with a bolt , then the rubber bump stop has a buldge on top of it so it goes on top of the spring and then slides into the chassis i suppose :S

    Anyway , it's TS14 mate

  10. #169
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    65 miles, 1h 20 mins. Not too bad, I think I might pop up one day f you don't mind and we'll have a look at it, I like learning how to do stuff like that anyway. You not going to AITP? I was gonna suggest a convoy down.
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  11. #170
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Yeah no bother mate, we're a friendly bunch of mates up here all into their cars so you'll learn in no time like i did

    Whens AITP ? I'm doing VWFestival on the 14th of August mate then edition , full weekend

  12. #171
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    It's this Sunday the 7th, there is 55 of us from Audisport so far but I think less than 10 are B7s, it's only £5 per car and can pay on gate, should be a good day but it's Kettering so a bit of a drive.

    When would be good for me to come up? I work shifts so any day is fine.

    Text me if it's easier cos I'm kinda hijacking your build thread here mate!
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  13. #172
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    I havent done much to it recently apart from a service and some new tyres on the front I might get a few bits and bobs done before ed38 but mostly likely more will be done before Ultimate Dubs next year :clap: Here's a few pics i found from VW Festival on Sunday



    192831_234083949969572_149874618390506_752345_2896 285_o by Chin., on Flickr


    226058_10150277250158177_515638176_7876874_2681728 _n by Chin., on Flickr


    290119_264186580260183_100000065292750_1140472_480 9271_o by Chin., on Flickr


    287048_10150742600650360_614870359_20038960_628244 5_o by Chin., on Flickr


    289100_10150742600545360_614870359_20038957_827737 7_o by Chin., on Flickr

    Thanks for looking

  14. #173
    TDIPOWARRR

    Status
    Offline
    Join Date
    Jul 2010
    Posts
    618
    Haha my mate Stu in that first pic.

  15. #174
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    I was there too mate but didn't see you, was you only there Saturday? I got there on Sunday at about 12:30 god damn traffic!
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  16. #175
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Nah mate i wasnt there on saturday due to work etc i got there early on sunday morning and stayed all day !

    Ill check my rota at work tomorrow and we'll sort something out with your coilovers

  17. #176
    Triple.O.G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Leeds
    Posts
    1,125
    That's rubbish, I walked round the whole thing and never saw your car. Gutted.

    Yeah sound mate, I have next three days off or not this weekend but the one after.

    Drop me a text.
    Mafia black 2007 A4 S-line 2.0Tdi - RNSE - Bluetooth - MFSW - GSM phone prep - Privacy glass all round - Cupra R splitter - Black Grill, surround and fog surrounds - 12" sub and 1200 watt JBL Amp - AP Coilovers - 19" RS6 Alloys - 6mm f & 15mm r spacers - Carbon wrapped interior - Blue LED dials - Ambient Lighting - Cruise Control - HID's - LED side lights - mapped to 185bhp / 380nm - Twin exit exhaust - RS6 style DRLs


  18. #177
    paul26982's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    north east U.K
    Posts
    1,275
    Hello mate' You no i dont have to say what i think of this car

    2003 B6 Audi A4 Avant. 3.0 V6 Quattro Sport

  19. #178
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Hello, take it as a good thing then !

    Havent updated for a while as theres nothing really to bore you lot with. Just trying to keep it clean and fix whatevers broke.

    I had a brand new water deflector ( the one that goes behind the wiper arms, below the windscreen ) knocking about for quite some time so decided to replace it the other day as the one that was on the car when i bought it had little chunks of plastic missing from it, looked like someone tried to praise it off with a screwdriver or something - idiot. Also replaced the coolant reservoir and put some fresh G12 in it Engine bay finally looks clean as the old bottle looked really mucky. Lastly i've picked up a brand new arch liner for the drivers wing as mine got ripped off @ cumbria VAG a couple of month ago, i managed to bodge it back on but it flew off on the A19 a few weeks back , hopefully ill get it fitted tomorrow when it stops raining. I've tried to get a last minute mod done before edition but it looks like the part won't be here in time, damn US bits =/

    Cheers for reading !

  20. #179
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Since i didnt go to edtion due to work etc , i thought id treat myself and the old girl

    Got myself some US spec marker reflectors , thanks Lodgey :clap:



    I thought due to the shape etc it'd be a ***** to cut out the correct shape in the bumper, HOWEVER since it's a VAG and it's put together by clever Germans , Herman must have thought it would be a good idea to leave a template on the inside of the bumper win win win :clap:



    Done



    Really happy with it , should have the rear ones next week

    Here's a few pics i was gonna upload in the last post


    FxCam_1313755124646 by Chin., on Flickr

    Some brand new screws for the new arch liner , anal or what ! :lol:


    FxCam_1314466085719 by Chin., on Flickr

    New arch liner in , almost


    FxCam_1314465845663 by Chin., on Flickr

    and here's how much i had left from the old one h34r:


    FxCam_1314465815220 by Chin., on Flickr



    Thanks for looking

  21. #180
    Reverse Gear

    Status
    Offline
    Join Date
    Oct 2011
    Posts
    14
    wow! you really drice a damn hot audi! the fog lights are interesting.

  22. #181
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Cheers mate , fogs are no more as of this morning ! Everyones done them now so it's back to "standard"

    Right, i havent updated this for a while so here goes

    I got some red rear side markers ,fitted them ages ago but got no pics yet ! It's a bit rough but the car will go in for paint next year anyway

    I was planning on doing this for a while now but the fact that everyones done it now kind of helped me get my arse into gear and remove the LaminX of my headlights and fogs , so :

    This is what she looked like this morning :


    IMAG0051 by Chin., on Flickr


    And then with no LaminX :o


    IMAG0052 by Chin., on Flickr


    Got something special planned for the headlights soon , hopefully before the meet

    The more eagle eyed viewers will notice that i also fitted a LCR splitter on the front, it's still not low enough though


    Got a few more things coming and that but i thought i'd just keep the thread alive ! Need to sort out some full car shots soon as my photography does it no justice whatsoever

    Ciao ! x

  23. #182
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Here's some pics i just took


    IMAG0058 by Chin., on Flickr


    IMAG0055 by Chin., on Flickr

    Ghetto smoked side repeaters :o


    IMAG0059 by Chin., on Flickr


    Cheers , more soon x

  24. #183
    Foxmeister's Avatar
    Fired Up!
    Funky Pong Champion

    Status
    Offline
    Join Date
    Apr 2009
    Location
    Sunny Glesga!
    Posts
    1,767
    Quote Originally Posted by Chin. View Post
    Here's some pics i just took


    Fantastic pic mate, stance looks spot on there!

    Project RS28 build
    http://www.audi-sport.net/vb/showthr...1-Project-RS28

    German cowboy walks into a car showroom and says "Audi".......

  25. #184
    Jord's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Ellesmere port
    Posts
    269
    Looks absolutely sick, favourite a4 ever, making me wanna swap my a3
    Side markers look wicked, I've got some lying around ready to fit, where did you get your plates from? I've got u.s plate recess with import plate but it's slightly too big, you running on coils? If so which ones?

  26. #185
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Thanks guys !

    Plates i got of ebay , eBay - The UK's Online Marketplace

    I think i bought 12x6 but theyre a little too narrow for the recess on the front so i think 13x7 would be spot on

    As for the coilovers , yes i am static and theyre the cheapest coils you can get made by TA Technix , search on ebay i think they change their name to Tuning Art now , search for shop called Hot Tuning


    Cheers

  27. #186
    paul26982's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    north east U.K
    Posts
    1,275
    i did the same on my leon with coilovers with these exact ones, where spot on for me too, dont listen to all those that havnt experianced them

    2003 B6 Audi A4 Avant. 3.0 V6 Quattro Sport

  28. #187
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Winter progress continues ...



    Removed my old plate recess meant for an A3 and fitted the proper B7 Jobby



    More soon !

    Cheers

  29. #188
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,656
    Looks miles better mate.
    A4 B5 Double Din, RNS-d, TMC, Full Sports Leather Heated with Leather Door Cards and Lower Door trims all for sale.

    Audrey's Build Thread
    RIP Audrey. She's being broken down.
    New Car, New Thread.
    Scott's Akoya Silver A8

  30. #189
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Cheers bro !

  31. #190
    Foxmeister's Avatar
    Fired Up!
    Funky Pong Champion

    Status
    Offline
    Join Date
    Apr 2009
    Location
    Sunny Glesga!
    Posts
    1,767
    Quote Originally Posted by scott b5 View Post
    Looks miles better mate.
    Agreed!!! Not sure if it did before, but looks so much more aggressive from the front like that, SCHWEEETTT!!!!!!

    Project RS28 build
    http://www.audi-sport.net/vb/showthr...1-Project-RS28

    German cowboy walks into a car showroom and says "Audi".......

  32. #191
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Cheers mate

    Won this on eBay the other day :



    Should be here next week ! :clap:

  33. #192
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Steering wheel's here




    ...and some new seats :bleh:



    Quick pic of how she's currently sat, hopefully she'll sit better next year


  34. #193
    paul26982's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    north east U.K
    Posts
    1,275
    Love it Chin, need to speak to you on advice for my headlights, need to do them soon

    2003 B6 Audi A4 Avant. 3.0 V6 Quattro Sport

  35. #194
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Yeah no problem just give us a shout !

    Got a couple of bits for sale.

    Genuine Water Deflector - £5 used but in good condition , does the job
    Pair of B7 Headlights - they were the early spec one with orange indicator lenses but i took them off so they look like the later spec ones. £100

    Cheers

  36. #195
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184


    Been urghing and arghing for the past couple of weeks but i finally grew a pair and got myself a private plate. It wasn't expensive and hopefully it's easily readable to everyone :lol:




    p88lsh by Chin., on Flickr

    Need to order some short plates now !

    Cheers

  37. #196
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,656
    Nice, what does it mean?
    A4 B5 Double Din, RNS-d, TMC, Full Sports Leather Heated with Leather Door Cards and Lower Door trims all for sale.

    Audrey's Build Thread
    RIP Audrey. She's being broken down.
    New Car, New Thread.
    Scott's Akoya Silver A8

  38. #197
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    POLISH It was either this or C14TN R Chin R , but it looked sh ite

  39. #198
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,656
    Quote Originally Posted by Chin. View Post
    POLISH It was either this or C14TN R Chin R , but it looked sh ite
    ahh yeah, can see it now.
    way better than Cat NR. :-)
    A4 B5 Double Din, RNS-d, TMC, Full Sports Leather Heated with Leather Door Cards and Lower Door trims all for sale.

    Audrey's Build Thread
    RIP Audrey. She's being broken down.
    New Car, New Thread.
    Scott's Akoya Silver A8

  40. #199
    1st Gear

    Status
    Offline
    Join Date
    Oct 2011
    Posts
    168
    nice private plate dude, how can you run that car so low!!! haha looks the nuts! you will need to keep it well clean all the time to match your plate

  41. #200
    Chin.'s Avatar
    P88LSH

    Status
    Offline
    Join Date
    Jan 2011
    Location
    Grangetown, Middlesbrough, United Kingdom, United Kingdom
    Posts
    184
    Haha yeah its all fun and games

    I try to keep it clean but dont have the time to wash it every day

    I was born in Poland hence the plate

 

 
Page 5 of 7 FirstFirst 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO