Hi guys, The clutch pedal on my TT failed and went all the way to the floor.Luckily for me i was parking at the time.It seems the small box section that pushes in the clutch pushrod (master cylinder i think) just sheared right off.This meant that the pedal would move in and out but didn't engage with the white clutch clip. I called a breakdown specialist who very kindly removed my pedal to allow its repair.The clutch now operates ok but i do feel as if it is more jerky than before and was wondering if this rod is adjustable for some fine tuning.Is this rod meant to be straight as it has a slight bend on it now.
Thanks if you took the time to read this.:icon_thumright:
Thanks if you took the time to read this.:icon_thumright: