Installing kufatec harness
I am going down the halogen to xenon route and have just routed the kufatec harness through the bulkhead ready for headlights this weekend..
I followed a guide that fed it in via the left hand side of a car into the drivers side which was left hand drive.. As mine is right hand drive its on the passenger side.
The question is.. do i now need to route the harness though to the drivers side to plug it in? Or is that look still on the left hand side of the car despite being of opposite wheel drive.. I just want to know before I start looking for a connector that isnt going to be there etc
here is the guide I have roughly followed
DIY: Halogen to Bi-Xenon - Kufatec Interface