Had car on rollers only 110 bhp :(
Hey guys I will get a pic up later of the plot.
So just to sumarise I have a 1998 tdi Audi A4 non-pd (engine code is afn) 110 as stock.
I recently installed bigger nozzles which should of made more power and tbh they felt like they had and more torque but the torque being the more noticeable!
Got to the rolling road day right after you guys left, in fact I think I saw a few of ya! But I made 110 bhp and 180 ft/lb torque so something is a miss!!
Also the guy said the torque was good as it did not nose dive but just dropped a bit.
I did have a remap planned, but this concerns me and I shall be taking a look in a min to make sure all is as should be.
Think first port of call is a oil change and service.
Other then that I suspect the right front disc of warped or rubbing as the is a slight squealing coming from it. Or the turbo has seen better days.
In vag-com I chaned the settings as per guide and it is currently at 4.8mg/r if that is relevant at all?
Anyone got any insight into this?