UPDATE: Coilovers Installed
Well I had my DP give way on me on Saturday and left my car JDM style.
Deafining loud on start up but some wicked snap crackle and pop on overrun.
Needless to say, there was a hole somewhere.
My mechanic pulled off the DP, fixed the split and had it back on in no time with a redesigned mounting point.
I got the car and was then able to give it a clean and finally get some snaps with the coilovers on.
I'm not overly wrapped with the way it looks, it still needs some adjusting which I will tackle shortly.
I think the front is sitting too high, needs to come down maybe 3-4mm and the back needs to come down another 2mm.
Anyone got some advice on getting the car perfectly level?
Some rubbing is being experienced, nothing too bad but slight rub on a speed hum drop off, etc.
Will remove the arch screw, hope that helps, if not wil switch the 12mm spacer with a 10mm.
The PSS10's seem very noisy. Over low speed bumps, they seem to make noise like something is loose.
I trust that everything is installed properly but it just doesn't sound right.
Once I get the height adjusted correctly, I will get an alignment and see what happens.
Enough talk, here are the pics: