Ordered. Will be with me tomorrow
Hmm, now I wonder if this would sort out the DIS message I have with the ebay LED lights I installed (which were supposed to work from 2003-present, but kicked up the bulb out error on my 2010). :uhm:
Just checked and I have no bit 7 available, unless it only shows with the OEM modules? Can you confirm Lala?
I have some on order from TPS which will be here in the morning.
yes I write before to ross-tech no open this bit, and only see 6
if you have BCM SW 651...
send me your log and I make good coding to work
Changed the FE to 7E, cleared the fault codes and will monitor. Bearing in mind these are aftermarket ones.
Lala... Do you know what this bit does exactly? Will it affect anyhing else apart from the license plate holders? Don't want a blown brake light and not know about it.
this is bit only for LED number plate
your code bite 17 is like my FE
I have a problem. My car is a MY11 and at for the byte 17 I only see 6 checkboxes and in my long coding I have 1E and not FE or 7E. How can I solve the problem ?
in your video you get the error out on cold diagnostic, to my knoledge that mean when you turn the igniction on it does a check, so what does the error happen while you are driving as it does its checks as that would be warm diagnostics?
i have done coding on BMW's and when you turn the diagnostics out if the bulb was to blow it wouldnt even tell you anymore.
is this the case in this coding?
your code is : 9E
still not working :((
you have SW ? in BCM
Lala30 - legend!
Just to inform people, works on MY12 by changing the byte 17 bit 7 as mentioned in this thread
Led lamps work, and no error on DIS.
Finally OEM LED lamps! Thank you very much.
Btw I had to bend the contacts so they would sit higher, as when I first installed them, they didn't work.
yes, those contacts are short. be sure that the bend sits nicely on cars contacts and screw it in tightly.
lala30 saves the day :D
lala your doing some good work here, keep it up mate. :superman:
Lala, I only have six options on in byte 17 , the long coding that i have is 76. how do I change??
I send PM
Weird, what part number is on the LED?
Well done guys, this is great news.
Now, can someone please do a write up of the changes that need to be made?
The information is all over the shop and confusing.
fitted mine today on a 54 plate a3 tdi works a dream.
i wanting to get a pairof these audi LED lamps for my 2011 A3 Black Editon and wondering if any one is near Carlisle UK who could code in my LED lamps???
just wanting to know on vcds where to go and what to do. goona ask and ex techy i know to code these lamps up. just thought if i know what im doing can explain better to him and tell him what he needs to do if he doesnt know??
Confirmed fitted and working without error on MY2008 A6 (prefacelift)
Bought from Kelvin_S due to one of them not working in his A3 - but weirdly both worked in my A6 :)
Will provide a night shot later ;)
Anyway heres the pics
So do we have more feedback for 2010+ cars?
Yes I posted and confirmed that they work in my MY12 car with the appropriate long coding in CE 09.
Is it possible for someone to give me clear instructions, how can I get these OEM LEDs to operate without the fault codes? Thanks...
My car is 2011 RS3.