Maybe handy to have if you like to install a used central armrest.
The original Audi fitting instructions & guide plate for Audi A3 2004 ->
Click to download the pdf.
D you have a pic that is to scale of the measurements?
I'll upload a .pdf tomorrow with the template, when printing - set to 100% or no scaling.
And just to be sure measure it:
- width = 170 mm
- height = 110 mm
Uploaded the Audi A3 2004/onwards guide plate .pdf file to download and print.
Scale 1:1 http://www.bublin.eu/car/Audi_A3_Arm...1B_By_Rain.pdf
Download the complete installation manual:
Always measure it after printing to be sure!
Your welcome Bramley,
Would you mind letting me know if you where able to use the template & how easy it is/was!
Maybe a few photo's as well if possible.
Thanks in advance,
Hi guys thought I'd add to this thread as found it very useful!
Got myself an armrest off eBay last week!
Printed off the scaled version of the template
Cut this out and managed to borrow a dremel
Remove rear ashtray and cubby hole and rest template in place and mark the hole!
Then obviously cut the hole out and slot the armrest mount through the hole and bolt through the fixing plate!
Here's the end result!
Great template from Raincheck!
Man I wish these things could slide back rather than tilt up. It would be so much easier to access drink holder.
Nice post, could come in handy