How to on... Hardwiring in an accessory.
Right Now having completed the install and with photos is a blow by blow guide of how to do it.
First things first what you will need:
Cigarette adaptor £9.99 (got mine from road angel however sure more available on the bay)
Fuse Holder £3.49 (Halfords)
Mini fuse 20A £1.89 (Halfords)
Some cable ties and some foam.
Right step 1
Identify which fuse point to use I went through them all with my meter and found which were constant lives and which were live on the ignition. I went for fuse 9 which was a mini fuse and was not allocated to any devise.
Secure power cable behind dash and through to fuse box, achieved by simply feeding wire along dash and the pushing under the trim.
Now to put the power loom together. On the positive wire I have wired in a fuse connector and inserted a 20A mini fuse just to be safe. I then on the negative terminal crimped on an O ring connecter. The fuse block could be soldered in place however I used a bullet connector here.
Next I attached the O ring to the dash bolt which gave an excellent earth.
I now had to trim the spade connector to fit fuse space 9 as this was a mini fuse and then inserted into position 9.
Now to tidy up all the wires....
To do this and protect the adaptor and inster and stop it ratteling about when placed behind the fuse box I wropped it in foam held together with cable ties.
I then carefully placed everything in behind the fuse box area.
Install done all working.
Hope this is of help to everyone!