That should be a piece of cake, I'm doing mine soon after my mate did his, took all of 5 minutes, made a huge difference as well.
Errrm...no : ) should of thought of that, if it helps, is easy on a V6, my bad.
Poly bushes are a doddle to fit as the bush comes in 2 halves. It is harder to remove the OE bush though, a press will help.
ok ta will get done when m8 does oil change on ramp makes it abit easyer . is that the only 1 to change on the gearbox mount
I did this the other day on my TDI, it should have been easy.....
It was an absolute pig!
The insert would not go in no matter how much grease was applied and when eventually it did, it was done by pretty much jacking the car up on the insert so the weight of the car pushed it in!
And the results once it was fitted? Now I now this thing is meant to bed in but after 10 seconds of the engine being switched on it was clear it this wasn't the mod for me. At idle it felt like I was a brick inside a cement mixer the vibrations & banging was that bad, it was that bad we jacked the car up, spent God knows how long trying to remove the thing & refit it, only to find it made no difference what so ever. We then tried raising the idle speed to smooth things out at idle but even at 940rpm the whole car was buzzing.
Even driving with it fitted we felt every engine vibration possible, I'm sure over time it would break in better, but for me it was totally unbearable. The only option I'm left with is to possibly beat the thing to a pulp with a mallet to soften it more then fit it, or try to modify it somehow to bring it to an acceptable level of comfort. Plenty of people swear by these things, for me though it just didn't work.
done it on mine and its a really easy mod. took me 5 mins to do after a whole long discussion of what i should do about the stupid juddering i used to get:
Undo the bolt, use a load of grease on it and then slip it in along with the washers and then redo the bolt. the car has improved loads since fitting it!