Im having problems with my heated seats. No heat through drivers seat, passenger seem ok.
I checked connections under the seat with a meter got 12v through both drivers and passenger feed wires. checked the resistance I think was 2.8 ohms.
I have checked measuring blocks with vcds for the seats. It is displaying that the thumb wheels are both on 6 even if I move them to any position other that 6. It is displaying temp actual 24 and Spec 64 on both seats but on the request heater window this stays on 'on' for a few seconds then displays 'off'.
when I first put vcds on the spec temp for the drivers seat was -99 for the drivers seat but that seemed to go to +64 and stay there after that.
Does this suggest its a thermostat problem in the drivers seat?
Id be very grateful for any help.