Heres one of mine ;)
Heres one of mine ;)
Car made 353 bhp and 289lbft, tuner said there was alot more torque to be made but didnt want to take any chances with the clutch. Feels rapid now!!
RS3-KEL why do you have that power dip between 4500 and 5000 rpm's? is it clutch slip?
i don't know what figures mine has but it feels quick :D
Needed a new o ring on the fuel pump as the original one couldn't handle the increase in fuel pressure. Was a bit worried when fuel was leaking into the engine bay.
Hi S, its could have been as there was aways a dip , but tbh i should have stuck the sachs clutch in as i do miss that raw power ,from the s3 ,the rs3 is more calm through the dsg box ,no doubt a map will sort it out..;)
that seems reasonable :D
mine wasn't on rollers since stage2 since the stock clutch was giving up, but few days ago had a play with r8 v8 and i was surprised (not as much as the guy in r8) :D
Funny thing is when i put her back to standard she was a dream to drive ,and no loss of power ,felt really tight lol
Hi will need to dig them out :)
I've just gone for the Loba/Sachs SMF set up, but noticed it comes with no release bearing, where can i get one?
Will i need my map tweaked to run more torque or will the car automatically run more torque with the new clutch set up?
Whats everyones Revo settings for Stage 2+ in terms of boost, timing and fuel?
each car has different settings, for example my settings may not be good for your car, but it's an good starting point if you have nervs and time to do logging and tweaking.
i have tried two: one set by revo which is b9t4f9, and another one b8t5f7.
Thanks for that, I'm on B7,T4 & F9. What setting would need changing to make better torque figures when the new clutch goes in?
don't really know mate. i've had map update after new clutch so all has been done at the garage.
you can play with the boost and fueling but with timming you need to be careful and log everything to check if it in the safe limits,
i think it's best to ask garage.
Yeah I'll ask them to look at the map again when the clutch goes in.
Don't forget to bed the clutch in mate
Chaps, is there a difference between the Revo Stage 2 & 2+ software or is it dependant on boost, timing and fueling settings?
^^ what he said :D
Cheers, looks like Stage 2 went on the last time i was in for a tune but 2+ is going on tomorrow with the new clutch.:icon_thumright:
The car will take a few days worth of driving to adapt fully,but the increase in midrange torque is noticeable right away.
Then when you go back there's going to be a bigger grin on your face!
When fitting the new Rev D Diverter Valve, is it a case of just bolting in the new DV, do you have to worry about tweeking the map? will any fault codes be picked up after changing?
nobody mentioned that lower engine mounts would need changing to something stiffer:].
apparentley not if you choose road use version, track only version would have made all bit noiser as they are really harsh.
So i've just managed to change my rev g diverter valve for the rev d. Easy job even for a complete novice!
The rev g looks in surprisingly good condition. I'm still getting a flutter sound when accelerating hard in 3rd and 4th. Is this something to worry about or is it what's called compressor surge?
Here's a few photos of the condition of the rev g:
I noticed the flutter sound when I replaced my old DV with a Rev D, absolutely nothing to be concerned about
My rev G was also in perfect condition but I changed it for piece of mind. Mine does this at stage one also.
I have compressor stall or fluttering but only between 3 & 4000 rpm. Also had it on my previous 8L S3 once I added an aftermarket intake. Compressor stall isn't a great thing for a turbo at all.
Here's some pictures of my Stage 2+ dyno results 355 bhp & 334 lbft.
So how big is the smile on your face with the extra oomph now?
Yeah it's pretty rapid now. Just need to think about brakes and suspension now.
I emailed Dave B but he never got back, ideally need a set up that fits over the standard wheel. Any ideas?? I'd prefer a drilled disk set up.
TTRS brakes are good