Decided to have a bash at refurbing my S3 wheels....
I have decided to start refurbing the wheels on my 57 plate S3. When I bought it the dealers had refurbed the wheels pretty crapply to say the least. The usual spraying over dirt, laying it on to thick etc..
So I bought a kerbed wheel from ebay for £50. It was in a sorry state with a big old gash in one of the spokes and loads of kerbing all round.
I am using the Wurth wheel paint, primer and lacquer. I am not going to do a full write up as there are quite a few on here already. Just thought I post up some pics just to show what you can do your self for the price of getting just one wheel done, and you know its done properly!
If anyone does want any help, feel free to shout and Ill help where I can.
Anyway heres the pics of the first one...
Ebay pic first, as I never took a before:
And here are 2 afters, think I will add a further coat of clear tommorow:
I am chuffed with the outcome so far, considering I have never done this before. Any I have read that the Wurth paint should easily stand up to the test of time.