Cruise control retrofit.......Sorted!
Ok here is the deal...... I have fitted the stalk on my 2006 TDI, and coded the steering wheel ECU (MFSW) to include cruise. Measuring blocks relating to Cruise stalk were also checked for correct functionand all OK, BUT...... NO banana.... it does not work?????
As for the wiring, I was pleasantly surprised that the wire (black/white) was already in place in the steering Connector plug and ASSUMED it ran all the way to the ECU.
So, my question is.... Anyone with this experience confirm that the wire does indeed go all the way to the ECU as shown in the wiring diagram or is there an intermediate connector somewhere?
Is there anything else that has to be coded with VAGCOM other than Steering ECU? Any other reason you can think of?:banghead: