Time for some questions.
I got my BT module delivered today and rushed to get it installed :)
First of all its a 8P0862335K model, didn`t know that when i ordered, i thought it was N. Some say that K have firmware problems, let`s hope they won`t appear in my car :)
First of all i installed it, coded it (i think correctly) made a call , microphone works everything ok
Thing is the contacts from my phone won`t download to the RNS-e (i believe its that the contacts are in Greek)
I also changed the wiring , thought it was a TEL NF + - problem, surprisingly it worked both ways. How could that be? I got TEL NF+ in pin 8 of the BT module and TEL NF- in 9
And one last thing
Check this photo end tell me how i should code the module, just to be sure i did everything ok.
I`m about to retrofit a MFSW tomorrow, so i would like to enable that already.
RNS-e coding : 0205755 (Got AUX also , set for MFSW too and used "Base plate diagnostic capable with Comfort Control)
And one last edit:
Since i used the KL30 (+12V) from the RNS-e , doesn`t this mean that the supply of the voltage will be always on? What are the chances of me ending up with a flat battery?