This thread finally gave me the motivation I needed to buy the parts and get the tools out this morning. I now have 2 fully working numberplate lights.
I've got the tool and parts but can't get the boot plastics off!!!
Undo the 2 screws under where the warning triangle goes, and 1 screw in each of the handles that you pull the hatch back down with.... then pull the ***** off
I've tried but i don't want to break the boot cover.
PS. I've just read this message back to myself and I'd like to say "no puns please!!"
Ha ha very good, I'll give it a go on Tuesday and let u know
This might help you with the tailgate trim:
Now my LEDs are not working, got only one working. Must be a dodgy bulb, gotta order some more now.
Just thought - your bulbs are probably ok - when I did mine they did not work - it turns out that the lense metal pronges can easily miss the contact point within the moulding wiring - i was 100% sure i did mine right - I had not!!! I took the moulding off and took it in the kitchen and put it under some lighting - there are some spaces / gaps on the back of it where, with the help of some light, you can see if the contacts are "contacting" and mine were not, on either of them!! Basically you just need to play around with the long metal prong until it touches, and hey presto all sorted!
Apparently this is a common problem as well - especially if you have changed the light covers for new ones, like me, as the new ones have slightly different length pronges.
Try this before buying any more bulbs, hope it works
Finally got it done what a Pratt on. All the nuts were corroded nd wouldn't come off! Took me 2 hrs. Worth in the end thow can't wait till it's dark
New LED bulbs? Check.
New light lenses? Check.
New screws? Check.
Copper grease? Check.
You know when sometimes you wonder why you bother? :(
Screws were solid as expected, so I drilled around the lenses, and got one of them out, the screw was still solid and even with mole grips wasn't budging. And then it sheared off.
So tail gate trim out, undid lock mechanism etc and found this:
This is in such a bad state I'll have to replace it, so stuck now till I can get to the dealers on Monday :ohmy:
It's appalling how bad these get.
Good luck mate - welcome to the strange tormenting world of "changing a lightbulb on an Audi!!!"
Thats what mine looked like except when mine came out it had a big crack in and snapped in two.
I'm just glad that none of the corrosion has transferred itself to the tailgate, or else I'd have been forced to buy a Euro style one.......
going back to were people have said use m3x20 bolts to secure the number plate bulb holders insted of audi the screws, i tried this yesterday and it seemed that they wouldnt grip into the plastic were the screw had been?
I always like to end on a happy ending!
All back together and debadged too:
It looks plain with nothing there IMO.....
I might rebadge it 4.2TDi :unsure:
i thought that when i first took all mine of james so stuck the s one on mine from the s4 ;-) does take a bit of time to get used to it but is better for cleaning too 4.2 a that would worry a few when thinking about get you of the lights lol :blackrs4:
These are an interesting alternative:
Dectane - LED License Plate Audi A3 8P, A4 B6, A4 , A6, A8, uva.
wow i bet they would be brite
hex heads FTW lol