Its an idea i've been toying with for some time and been working on since Saturday.
Thanks to Byzan for the clocks I can butcher and thanks to TonyA4 for the clocks to test (I've not blown them up yet).
I want to fit facelift clocks to my Pre-facelift car.
There is changes in the cable layout, different plugs and different sensors needed. Forgetting the sensors for now, they can be added later. I made a loom up out of facelift plugs and wires and the sockets from the back of a pre-facelift clock. I got pictures for that, which I will post up later.
I think I got most of it working but I'm stuck on a couple of little bits.
Door sensors. not all but some. thats down to me not wiring them in.
Dash lights. The clocks light up when I turn the light on but they don't when I open the door or turn the key, like pre-facelift lights. Is this correct?
Dimming the display.
Thats all I can test at the moment as I can't start the car to get it up to temp, speed or revs.
What does not work:=-
Its moaning about some sensors, oil, breaks and I think thats it. I can't really tell cause the screen has missing pixels.
The immobilizer, I need to get this removed, codded, changed. I'm not sure what.
Really important, I can't set the time. I push, twist and nothing happens. I think it goes in to a test mode at some point.
Any ideas, pointers, helps or any thing would be great. My main aim is to get it working and the car driving. I will worry about the oil sensors and break sensors at a later date. I think thats the sensors thats missing.
Here is some images (If they don't work, let me know and i'll get some photobucket ones up tomorrow)