Cant get pinch bolt out and wont turn (2.4 V6) - HELP please
Just replacing the wheel bearing on the drivers side.
The double pinch bolt at the top of the hub ass will not come out I have ........
Removed nut all ok
used impact gun no joy
breaker bar as above
asortment of hammers
loads of dub d
i am reluctant to heat as the wd carb cleaner mix and also damaging the joints.
The top ball joints move freely in their holes
I have also tried to remove the top 2 arms but the front are bolt will not come out as it hits the inner arch.
Any help or ideas would be helpful.