trying to upgrade the amp in my car
run power lead, remote and earth , made up rca's to fit to the loom/iso....nothings connected yet, i encounntered this issue..my iso/loom looks different to the diagram detailled above. To start with i have more pin sockets than the one shown on http://www.audi-sport.net/vb/showthr...light=bose+amp (by andy amc) . I have a standard current tester. I have worked out which is the remote. and my live and ground are sorted...just a little confused as to which im ment to tap in for the lower level input...obviously i need it to have the correct pallarities(spelling bad,sorry). Anyone got any ideas which they are...there is a picture on my profile if you thinks you could help....many thanks in advance...
Talking to myself here i know
Ok it appears that if i unplug this loom from the amp...i loose all the back speakers also.. that might explain all those pins..there must be a shared negative for the rear speaker set..and maybe the lowlevel input also..anyone know>? . Ive got all the amp in the car..powered ...but no low level input as before. could the loom diagram for this be in a haynes manual...i just bought 1 off ebay(usefull anyway)
THANKS FOR ALL YOUR HELP GUYS
ITs all in and working. i tapped into the cables rather than the plug/iso..so now i have the standard amp/sub and speakers running as well as my amp and sub...sounds nice...no need for the ground loop yet..fingers crossed i wont need it...cheers.:friends: lol:arco: