HELP: People of ETKA, I need some part numbers!!!!!
Right folks, all has been going fairly OK, aside from another dead gearbox, but tonight I've sprung a leak!
I need part numbers for the following bits, all for an AMK S3, so I can just order it from TPS and replace the whole bloody lot to avoid a leak coming back
1. The plastic multi way fitting that goes onto the end of the head, mine is different being an AGU, I need an AMK one which I THINK is a different angle to mine
2. The short bent hose that comes off the back of the above plastic fitting, I would make one up myself, but it's very short, and reduces from 25mm down to 19mm, so I need to get the right one, again for an AMK S3
3. Also, if possible, the 16mm hose that comes off the bottom of the above plastic fitting too, and I think connects to the heat exchanger, Can't remember exactly, but it's the one that comes off the bottom!
If anyone can help I'd be SERIOUSLY grateful! I've worked like crazy to get this car ready for mapping this weekend, and this is now the only thing stopping me, and I don't want to bodge it and stick some radweld in there!