yes another RNS-e, SDS, PTT question....
sorry I know its been done to death, and i've done loads of searches but there is a question not been asked, therefor unanswered...
Actually I have a couple of points and I'm hoping you clever peeps can assist.
06 B7 RS4, Retrofitted RNS-e and Fiscon BT with mic.
SDS SW660 installed, auto configured to English
Engineering mode, changed SK as PPT
<< Scan pressed twice gives me the English lady.
When prompted for a response, my commands fall on deaf ears.
Ok thats the general layout.
Couple of questions.
(i) when i leave the car and return the << Scan button doesn't work. In engineering mode the SK as PPT is un-highlighted (not selected) anymore.
Anyone know why?
Considered it to be a power thing but all other data i.e. Radio stations, phone numbers still saved.
(ii) The mic question.
Can I use the Fiscon mic already fitted? if so (by reading the multiple threads says I can) can someone in baby steps give me a step by step description on what I do.
I believe I have to take the BT mic to the RNS-e and then return the wiring to the BT module. But without a electical diagram or step by step instruction, I don't want to potentially cause any damage.
Guys, I have come here on many occassions now looking for assistance as I believe it to be one of the best places to get the best advice.
I would greatfully appreciate your help in answering these questions.
I think once these 2 queeries are answered I will have the fully functioning SDS system which I do miss from my older cars.