Checking engine oil on MMI
New to these forums...
Someone over at Pistonheads with 2.0TFSI was telling a story of how his engine needed replacing after it comsumed quite allot of oil over a period of time. This got me thinking that I should check my oil. So no dipstick, the oil must be checked via the MMI, under the car settings.. So this is where the fun and games start. Engine is warmed up I go the oil settings says something like "Wait approx 2 mins and switch engine off oil levels will appear" I make sure I am on a flat surface..
So I turn the engine off, however not fully out on the ignition, go to the oil settings again, says please switch on ignition to configure the car settings!!! So followed the manual, it doesn't work. I have opened the bonnet in hope that it may initiate oil settings - no luck.. Anyone else had this problem? Just want to check the oil level!!!