b8 steering wheel swap s line to flat bottom airbag wiring question
considering a steering wheel swap on an 09 B8 Audi A4 from standard S line to flat bottomed, I have a black edition A3 which has the flat bottomed wheel so before buying one , I removed both steering wheel airbags to compare, wheels look as though they will be interchangeable but airbag wiring is different, they both have a similar looking connector but they both have a different shaped lugs on the inside preventing the connector pushing on, has anyone done a swap, is there a way around it or is it case of you have to get the airbag for the exact model? Ive read on one forum about trimming the lugs off the connector allowing it to push on but not so sure on that would the wiring be the same ? the flat bottom wheel has all the wires in black where as the s line wheel has coloured wires.
thanks in advance for any replies Jeff