Audi-Sport.net - VCDS (formerly VAG-COM) forum http://www.audi-sport.net/vb/ Discussions on the use of VCDS (VAG-COM) and other Diagnostic software en Sun, 19 May 2013 15:58:24 GMT vBulletin 60 http://cdn.as-static.com/vb/images/styles/AnimatedArena/misc/rss.png Audi-Sport.net - VCDS (formerly VAG-COM) forum http://www.audi-sport.net/vb/ Fault code 005913 / P1719 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189087-fault-code-005913-p1719.html Sat, 18 May 2013 15:38:43 GMT Image: http://i195.photobucket.com/albums/z312/NotNormal_photo/6536b4919d773b79d09b7ab4e544c6c1_zpsff32229f.jpg Any help / ideas, no fault codes...

Any help / ideas, no fault codes in the engine ecu or anywhere else in the car ?! ]]> VCDS (formerly VAG-COM) forum NotNormal http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189087-fault-code-005913-p1719.html battery runs out of power http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189044-battery-runs-out-power.html Sat, 18 May 2013 08:07:56 GMT 1 Fault Found: 02071 - Local Databus 004 - No Signal/Communication this is for Cent. Elect. component. 1 Fault Found:


02071 - Local Databus
004 - No Signal/Communication


this is for Cent. Elect. component.


I cleared this error but always appeared again.


I have Audi A3 2004 , 2.0 FSI 110kwh AXW




The problem is that my battery runs out of power after 48hours.
I put a new battery but the problem has not disappeared.


Sometimes i have this problem / sometimes i don't.


How can i fix this error ?

thanx ]]> VCDS (formerly VAG-COM) forum paul_cosma http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189044-battery-runs-out-power.html measuring blocks for boost and afm on passat? http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189017-measuring-blocks-boost-afm-passat.html Fri, 17 May 2013 19:41:14 GMT I know its not Audi but a guy round the corner from me is having limp mode issues possibly boost related. Ive logged 3 10 and 11, I think I can see... I know its not Audi but a guy round the corner from me is having limp mode issues possibly boost related. Ive logged 3 10 and 11, I think I can see requested boost graphs but lazy actual boost, however the labelling isnt great. Car is a y reg 1.9dt 100bhp passat

Also the afm values, I think im seeing expected value topping out at 850mg but the other reading never really makes it there.



Again im not 100% im reading blocks correctly. Yesterday the car felt flat all the time no turbo, n75 actuates in output tests. Today he Mr muscled and was a clear different but still limp mode.

There were a couple of fault codes
00741 brake pedal monitoring implausible signal
00575 intake manifold pressure 17-10 control difference intermittent

Any ideas?
thanks tom ]]> VCDS (formerly VAG-COM) forum @udi A3 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/189017-measuring-blocks-boost-afm-passat.html Vcds lite xenon level ? http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188954-vcds-lite-xenon-level.html Fri, 17 May 2013 05:50:13 GMT I have vcds lite and I was wondering if I paid to register it would i be able to adjust my xenon lights on a s3 8l ? I have vcds lite and I was wondering if I paid to register it would i be able to adjust my xenon lights on a s3 8l ? ]]> VCDS (formerly VAG-COM) forum Goubo1 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188954-vcds-lite-xenon-level.html can you re code a replacement ABS module with the shareware version of VCDS lite? http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188831-can-you-re-code-replacement-abs-module-shareware-version-vcds-lite.html Wed, 15 May 2013 14:41:44 GMT Hi, Quick question - can you re code a replacement ABS module with the shareware version of VCDS lite? i have a replacement module with the... Hi, Quick question - can you re code a replacement ABS module with the shareware version of VCDS lite?

i have a replacement module with the correct part number, i'm assuming i will have to code the replacement to the car, is that correct?

the car is a 1998 Audi A4 Avant 1.8 petrol ]]> VCDS (formerly VAG-COM) forum deejames http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188831-can-you-re-code-replacement-abs-module-shareware-version-vcds-lite.html VCDS scan needed in North London, Tottenham or surrounding areas http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188794-vcds-scan-needed-north-london-tottenham-surrounding-areas.html Wed, 15 May 2013 09:07:30 GMT Hi, I've never had my car scanned before, I've got an Audi A3 8p fsi 2004 I keep getting a coolant warning coming up and I have a yellow emissions warning light coming up. My fans and demister ain't working either. I was hoping somebody could give my car a scan to see a list of the faults I have etc. I'm in North London, Tottenham but I can travel up to where you are if it's not too far away.

I mean meaning to ask this for a while. ]]> VCDS (formerly VAG-COM) forum dk1234 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188794-vcds-scan-needed-north-london-tottenham-surrounding-areas.html VCDS help needed in Nuneaton, Warwickshire http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188752-vcds-help-needed-nuneaton-warwickshire.html Tue, 14 May 2013 18:28:27 GMT Hi If anyone is located near Nuneaton, Warwickshire i have a list of faults as long as your arm that need to be looked at. details listed... Hi

If anyone is located near Nuneaton, Warwickshire i have a list of faults as long as your arm that need to be looked at.

details listed here

http://www.audi-sport.net/vb/a4-a4-c...en-a4-cab.html

Please let me know if you can help

thanks ]]> VCDS (formerly VAG-COM) forum campbell1986 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188752-vcds-help-needed-nuneaton-warwickshire.html Rear door module problem regarding retrofitting illuminated door handles http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188638-rear-door-module-problem-regarding-retrofitting-illuminated-door-handles.html Mon, 13 May 2013 12:07:39 GMT I have a Audi A4 b8 2010 sline avant vin no.WAUZZZ8K9AA133596 and have retro fitted illuminated door handles, warning and puddle lights in all 4... I have a Audi A4 b8 2010 sline avant vin no.WAUZZZ8K9AA133596 and have retro fitted illuminated door handles, warning and puddle lights in all 4 doors and recoded all in vcds. All the fronts doors work fine but the rear door only the handles don't light up on both sides. I was advised by t8ups that some of the modules of the rear maybe need changing and removing the door card I found my modules didn't have pin 3 which the rear door handles are wired to.
So I checked on topic on audienthusiasts.com on installing ambient lighting controlled door pocket lighting which mentioned about some modules have shaded or half shaded blocks in the position they are in the car on top right corner of module.
So I purchased 2 modules from eBay.de with the same part number but a different letter at the end and shading in the blocks as required, I installed them and recoded them but still no door handle lights plus I have now lost the puddle and warning lights in rear even tho I coded them in and have no fault codes. These modules have pin 3 required for the handle lights. Not sure what to do as Pns2007
on this forum said its something to do with the letter at the end of the part number that denotes what the module can do?, and advised looking on Etka but I don't have this info. Can anyone help?
Original module number 8k0959795C
Replaced module number 8k0959795E
Attached Images
]]> VCDS (formerly VAG-COM) forum Tricky1971 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188638-rear-door-module-problem-regarding-retrofitting-illuminated-door-handles.html Audi A5 retrofitted cruise control.. need help with high beam not staying on http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188500-audi-a5-retrofitted-cruise-control-need-help-high-beam-not-staying.html Sat, 11 May 2013 18:51:20 GMT I retro-fitted a whole new stalk column and found that when i push for high beam it doesn't click ... it isn't broken i have a vw caddy and when you push the stalk forward it springs back but the full beam is still on until you pull back on the stalk... my audi doesn't do this and just acts like im flashing someone... is there anywhere in coding i can change the characteristics of the high beam..

i have a genuine vcds cable ]]> VCDS (formerly VAG-COM) forum andys clifford http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188500-audi-a5-retrofitted-cruise-control-need-help-high-beam-not-staying.html Enabling Touring mode in the Exterior lighting menu http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188459-enabling-touring-mode-exterior-lighting-menu.html Sat, 11 May 2013 08:40:13 GMT I have successfully enabled and disabled the touring mode with vcds to do the headlamp conversion. However by using the hidden menu I also found that... I have successfully enabled and disabled the touring mode with vcds to do the headlamp conversion. However by using the hidden menu I also found that the Exterior lighting menu can be changed. The current number is 5 and three items appear in my menu. If I increase the number do you think I will be able to enable the Touring mode menu to appear within my exterior lighting menu. I hope I make sense. ]]> VCDS (formerly VAG-COM) forum rovervampire http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188459-enabling-touring-mode-exterior-lighting-menu.html Airbag warning light - Newport, Shropshire. http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188316-airbag-warning-light-newport-shropshire.html Thu, 09 May 2013 14:34:31 GMT Dear All, I am based in Newport, Shropshire, near Telford. Basically the airbag warning light on my Golf diesel 2004 estate will not turn off.... Dear All,

I am based in Newport, Shropshire, near Telford.

Basically the airbag warning light on my Golf diesel 2004 estate will not turn off. I have ordered a ProScan v400 unit but that has not worked.

If anyone could help I would be most grateful and naturally I would compensate for time and trouble.

Best,

ajjmaj (ajmir) ]]> VCDS (formerly VAG-COM) forum ajjmaj http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188316-airbag-warning-light-newport-shropshire.html Vcds north east http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188216-vcds-north-east.html Wed, 08 May 2013 10:47:30 GMT Hi I have removed my tow bar from my A6 as it is going in a couple of days and i'm after someone to change the coding back. I have all the codes and I am prepared to travel.

I'm located near middlesbrough.

I am on holiday so anytime is possible cheers. ]]> VCDS (formerly VAG-COM) forum Gavin0478 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188216-vcds-north-east.html Anyone with VCDS in Glasgow ?? Could really use some help !! http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188208-anyone-vcds-glasgow-could-really-use-some-help.html Wed, 08 May 2013 08:21:10 GMT Hi guys complete n00b !!

New to the forum and new to Audi's. Bought the wife a 2002 A3 (8l) 1.8t last week. Great little car. Had history and had some recent work done etc.. So all looked great !!

On the drive home l decided to open it up a little and noticed a flat spot at around 3500-3750 revs in 3rd and 4th gear. Also it seemed to idle a little erratic. After reading loads of threads on here, decided to clean the MAF sensor. Done so and took out for a spin and still the same. Again more reading and deciided to clean the Throttle Body. Done so and car seemed more responsive and as far as l can tell flat spot gone.

However, idle still rough and now when WOT in 3,4,5 gears the car hesitates and feels like it pulls me back then the Traction Control light illuminates and wont go off. At first when l cycled the ignition it would stay off until i opened the car up again, but last night it came on and now wont go back off !!

There are no other warning light on at all. Im convinced its the MAF sensor. I even disconected the MAF plug and started the engine, but no engine mangement light ?? So i just re connected it. I know l need it connected to clear the codes for the TCL and possibly to down the MAF !!

Any assisatnce is greatly appreciated !!

Brendan ]]> VCDS (formerly VAG-COM) forum bree9482 http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188208-anyone-vcds-glasgow-could-really-use-some-help.html ESP fault herts/beds http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188061-esp-fault-herts-beds.html Mon, 06 May 2013 09:34:19 GMT Any one around beds/herts that can plug my 07 s3 in and it's showing a esp fault, is like to see what then problem/code is
regards Adam ]]> VCDS (formerly VAG-COM) forum Adamj http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188061-esp-fault-herts-beds.html How to use VCDS http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188044-how-use-vcds.html Mon, 06 May 2013 00:03:20 GMT I've got a genuine ross tech vcds cable, ive got the software installed and i can do a basic scan but ive no idea how to use it all properly, i.e program things, how to get live readings etc, and guides anywhere so i can use the full potential of this software?

Thanks ]]> VCDS (formerly VAG-COM) forum s3reptdi http://www.audi-sport.net/vb/vcds-formerly-vag-com-forum/188044-how-use-vcds.html