AMD TechnikDTUK
Results 1 to 7 of 7
  1. #1
    Reverse Gear

    Status
    Offline
    Join Date
    Jul 2009
    Posts
    4
    Post Thanks / Like

    Thumbs down a6 2.5 v6 serious smokin

    hi just bought an a6, it is an old motor but is tidy. Made one mistake didnt check it well enough, the pleasure of dealing with ebay is there nearly all heaps of crap and the owners are worse. Any way I bought it with a small amount of smoke come from exaust and understanding it cleared when moving which it does do but what he failed to tell me was it had '0' oil in it. When I put oil in it did smoke alot more but still only when slowing down for a junction or round about or going very slow. I started out thinking it was a ring gone but it runs way to smooth , so I thought head gasket so had the water tested and it was clear. I have got no idea and am n ot mechanically minded so any good suggestions apart from get rid as I absolutely love the comfort and style of the car , but the smoke i could do with out.

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    fjtwelve's Avatar
    Moderator

    Status
    Offline
    Join Date
    Jan 2006
    Location
    Falmouth, Cornwall
    Posts
    747
    Post Thanks / Like
    What year is it?
    2001 A6 Avant 2.5TDi quattro Sport 180hp+TurboDynamics MD438 hybrid+Bosio Race683s+3" exhaust+Celtic Tuning remap= need another dyno run
    2004 A4 Avant 1.9TDi quattro Sport 130hp + Superchip
    1988 Yamaha FJ1200 120hp

  4. #3
    Reverse Gear

    Status
    Offline
    Join Date
    Jul 2009
    Posts
    4
    Post Thanks / Like
    its is on a t plate , had successful day yesterday took off oil cap and ran it round the block and absolutly no smoke, so i now believe it is the breathers, any other suggestions please tell me. thank you

  5. #4
    Reverse Gear

    Status
    Offline
    Join Date
    Jul 2009
    Posts
    4
    Post Thanks / Like
    spoke to local garage and they suggested a cap with out the seal would work until they have the parts in as they said the cap is only there to stop oil coming out and as long as the preasure does not build up the engine will be fine . is that correct ??? why have an air tight sealed cap if its not needed. they said 10 days for parts will it survive that long

  6. #5
    Reverse Gear

    Status
    Offline
    Join Date
    Jan 2008
    Posts
    17
    Post Thanks / Like
    it will probably be ok - I would keep an eye on the engine bay to watch for oil coming out of the cap.

    The part is available from audi - they will likely have it in stock - but make sure you get the later part number ( on a T reg audi / your dealer will likely order the part to match what is in there ). There are plenty of posts on here that explain and have the part number.

  7. #6
    Reverse Gear

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Manchester
    Posts
    22
    Post Thanks / Like
    '00 2.5tdi clouds of white smoke!!!


    is it similar to this.?

  8. #7
    quattrojames's Avatar
    Moderator

    Status
    Online
    Join Date
    Mar 2008
    Location
    Dorset
    Posts
    10,988
    Post Thanks / Like
    There's a guide HERE if you want to have a go at doing it yourself
    2003 A4 Avant 2.5TDi quattro

    To do: Joey-mod headlights - Twin Exit Exhaust Conversion - Puddle light and Footwell light retrofit - Rear roof spoiler.

    WANTED: Unpainted standard front & rear lower valance (with twin exhaust cut outs) - from someone who's doing an S-Line upgrade.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO