Hi Guys, this is my first post of what looks like a fantastic forum. My names Ashely and i run a Pro Mobile Detailing service around Cheshire and Wales. Im also a Swissvax Authorised Detailer. Hopefully i can be of some assitance to you all when it comes to car care and will post as much Audi related work as possible.
To get the ball rolling here i have a TTS convert which i did around a month ago. This was an enhancement detail so only a single stage paint correction process (used for light swirls and scratched and a dramatic overall improvemnet of the vehicles finish) and was protected with 2 coats of Swissvax 'Best of Show' carnauba wax.
I didnt mange to get any of the washing stages due to the odd shower of rain But the usual multi-stage wash process was carried out:
These where the typical defects on the vehicle, caught here in natural sunlight
- Wheels rinsed then cleaned with a non-acidic wheel cleaner and various brushes and arches cleaned
- Vehicle rinsed and then a layer of Snowfoam applied and left to dwell
- Vehicle washed with 2 bucket method and dried using plush microfibre towels
- Vehicle and wheels de-tarred and de-contaminated
- Some areas masked up like badges and trim and away we go...
Results were very pleasing after one pass. Very nice and show the results a Enhnacement detail can acheive
Wing Enhanced and boot lid untouched
Swirls before under light source
A 50/50 shot of the passenger door, left side untouched showing swirls and typical state of paint. Right side after polishing
Interior detailed. Leather cleaned with Swissvax leather cleaner and treated to Swissvax leather milk
And the afters...wearing 2 coats of Swissvax Bes of Show!
Wheels treated to Swissvax cleaner fluid then SWissvax Autobahn PTFE wheel wax. Tyres treated to Swissvax Pneu
Thanks for taking the time to read. Ill try put up some more in depth posts when i get chance.