Owner of this contacted me after founding some severe etching from bird droppings on his car after leaving it somewhere for a few days and couldnt bare looking at them anymore.
Most of the correction was carried out using wool pad and Menz 3.02, The etching on the bonnet required Megs 105 and required several hits and some very high RPM's to fully remove.
Before
After
Here you can see where client used T-Cut to remove a a spot but just made matters worse
After
Few other before and afters from around the vehicle
Once all heavy compounding was complete I went around vehicle with Menz 203s and then followed this up with 3m Ultrafina.
Paint was then given a wipedown with IPA and then a coat of Blackfire All Finish Paint Protection was applied via DA.
Tyres were dressed with Zaino Z16, wheels sealed with Swissvax Autobahn, exhausts cleaned with Autosol/wirewool and then sealed with Blackfire All Metal sealant. Exterior plastics treated with 303 Aerospace
Engine bay was dressed with 303 Aerospace
Most of the correction was carried out using wool pad and Menz 3.02, The etching on the bonnet required Megs 105 and required several hits and some very high RPM's to fully remove.
Before
After
Here you can see where client used T-Cut to remove a a spot but just made matters worse
After
Few other before and afters from around the vehicle
Once all heavy compounding was complete I went around vehicle with Menz 203s and then followed this up with 3m Ultrafina.
Paint was then given a wipedown with IPA and then a coat of Blackfire All Finish Paint Protection was applied via DA.
Tyres were dressed with Zaino Z16, wheels sealed with Swissvax Autobahn, exhausts cleaned with Autosol/wirewool and then sealed with Blackfire All Metal sealant. Exterior plastics treated with 303 Aerospace
Engine bay was dressed with 303 Aerospace
