Sky InsuranceMonster Motorsport
Results 1 to 25 of 25
  1. #1
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21

    My Audio Install

    Hi,
    Just thought I would post a couple of pics of my install that is nearing completion. I have got some build pics so if anyone is interested, let me know and I'll post more up.

    The system consists of Focal 165 K2P 6.5" mids and Tweeters up front in custom door builds. These are run actively from a Genesis Dual Mono (mids) and a Genesis Stereo 60 (Tweeters). There is a third Genesis amp, a Mini-Block to run two 12" JL Audio W3v3 Subs. I also have an Audio Control Epicenter to enhance the bass.

    Up front, I will be having an Alpine IXA-W507BT connected to a USB laptop hard drive which will be located in the front centre arm rest. I also have an Alpine 6 disc CD changer in the glove box as this head unit does not have a CD or DVD drive in it.

    All the boot has been sound deadened with 10 sheets of Dynamat so it hopefully won't rattle too much.

    On to the pics...

    Custom Tweeter Pods:


    Door Builds Being Built:


    Door Card Completed:
    I must sort out my silver trim panels. They are really badly scratched!


    Dash Out:
    My car came with a single DIN Concert II head unit, and my wife has bought me an Alpine IXA-W507BT double DIN head unit for Christmas so I have had to take all the dash apart to replace the single DIN housing with the Double DIN housng. This is what it was like with it all apart:


    Boot Build:
    I have done a rather nifty build here! I wanted to be able to open the boot when I park up without all my amps and subs on show. To facilitate this, my install can be in two modes, either open or closed. In "open" mode, the floor is flat and the amps and subs are visable (below):


    The amps are in front of the subs. Some of it still needs to be trimmed:


    In "closed" mode, the amp lid lifts up as shown above, then the larger panel nearer the back of the car lifts up and locks into place to hide the install and make the boot appear "normal" to anyone looking in. There will be a cover over the epicenter eventually:


    Below this panel that has lifted up is enough space to store bits like my laptop. The floor of this section also lifts out to facilitate access to the spare wheel:



    Hope this has been of interest to someone!

    Neil
    Last edited by Neil Trowbridge; 22nd December 2009 at 08:10. Reason: Sorted pictures

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    david_phillips95's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Nov 2008
    Posts
    538
    Pictures dont seem to be loading mate?

    Davie

  4. #3
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    Thanks. I tried posting pics from twitpic as I have already posted them there, but for some reason Twitter do something funky to make the pics not visable.
    Anyway, I've hosted them myself now so should be ok now.

  5. #4
    smudge_don's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Sutton, Surrey
    Posts
    2,941
    That's a really clever way of doing it Neil!

    Might have to come and take a look myself one day, you not being too far from me
    Currently driving a 55 plate Ford Mondeo ST. But as Arnie once said...


    I'll be back!!!

  6. #5
    1st Gear

    Status
    Offline
    Join Date
    Aug 2005
    Location
    London
    Posts
    263
    Great install! The door pods are very pro!

  7. #6
    david_phillips95's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Nov 2008
    Posts
    538
    looks really good mate, very professional

  8. #7
    jisumfish's Avatar
    4 Spring Duck Technique

    Status
    Offline
    Join Date
    Jul 2007
    Location
    Hampshire
    Posts
    74
    Excellent install! Keep posting the pics!

  9. #8
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    Trimmed the passenger door pod for the mid today...

    Need to screw it to the door card then put the mid into the pod.


  10. #9
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    Subscribed to this thread

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  11. #10
    Broken Byzan's Avatar
    Photographic Moderator

    Status
    Online
    Join Date
    Apr 2004
    Location
    Cardiff, United Kingdom
    Posts
    12,354

    My Social Networking

    Follow Broken Byzan On Twitter Add Broken Byzan on Facebook Add Broken Byzan on Google+ Visit Broken Byzan's Youtube Channel
    Nice one, get yourself over to talkaudio. Are you looking to compete in anything?

    You looking for SQ judging by the looks, well done

  12. #11
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    Neil do you get your Dynamat cheap? if so where?

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  13. #12
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    Quote Originally Posted by Byzan A4 View Post
    Nice one, get yourself over to talkaudio. Are you looking to compete in anything?

    You looking for SQ judging by the looks, well done
    I'm a member on Talk Audio, but I rarely post. Once I have completed my install, I may think about competing depending on how it sounds!

    Quote Originally Posted by rasA4 View Post
    Neil do you get your Dynamat cheap? if so where?
    A mate of mine used to own a car audio shop, so I used to get stuff at trade price which was nice. I bought 3 bulk packs some time ago from him, but never used them so I had plenty available for this install.

    When lookng recently, I found ebay to be one of the best options believe it or not.

  14. #13
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    So, this evenings work...

    A few days ago, my brother gave me some carbon fibre looking vinyl. As my trim is badly scratched, I tried covering my gear surround with it. I'm open to opinions on this as I havn't made up my mind if I like it or not yet.


    I bought a CD changer to co with my new Alpine head unit. When I got the changer, the front was badly scratched, so I removed the front panel, took the sliding door apart, sanded and filled the scratches and re-sprayed the front panel in matt black to match the tweeters. I also put some of the carbon look trim on the front to match what th rest of the interior might look like.
    I then had to cut the back of the glove box out using a jig-saw and push (hard) the changer into the space at the top of the glove box. It's a VERY tight fit and quite a bit of shoving was required! No screws will be needed to hold that bad boy in place!

  15. #14
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    yea been looking on eBay for dynamat or similar,
    very neat so far what HU you using?

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  16. #15
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    I'm going to be using an Alpine iXA-W407BT
    http://www.alpine-electronics.co.uk/...-w407bt-1.html

    It doesn't have a CD or DVD drive in it. It is designed to play from an iPod or USB hard drive. As I have all my music converted to MP3, I don't really have a need for a CD player. The only reason I added a changer is because I bought it cheap and thought it was worth having in case a passenger says "put this CD on", or if I buy a new CD.

    Whilst on the subject of the USB devices...
    My car didn't come with an armrest. I bought a new armrest and whilst fitting it, I fed through a USB cable and the iPod video cable into the storage compartment. Here is the USB hard drive and iPod in the armrest (yes I know it's an old iPod, but I hate the things and it probably won't be used anyway!):
    Last edited by Neil Trowbridge; 28th December 2009 at 00:03.

  17. #16
    1st Gear

    Status
    Offline
    Join Date
    Nov 2009
    Location
    Essex
    Posts
    116
    Excellent job on the install mate. How's it sounding?

  18. #17
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    It's not playing yet as I still need to get the head unit in, but should only be a couple of days now.

  19. #18
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    Finally got the stereo playing in the last few days. It's gonna take a while for the new speakers to run in properly and loosen up, but it is sounding better each day at the moment.

    Thinking about adding an Audio Conrol DQX - this is a 30 band EQ and 3 way crossover. With this I can RTA the car and get it sounding even better.

    I made a custom panel for the gain controls for the Epicentre and the Miniblock amp (near the cigarette lighter) and trimmed it the same as the gear leaver surround. I'm happy with the result. Picture below shows the head unit in and running. Happy days!


  20. #19
    jisumfish's Avatar
    4 Spring Duck Technique

    Status
    Offline
    Join Date
    Jul 2007
    Location
    Hampshire
    Posts
    74
    Looking good

  21. #20
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    WOW Looks really good that HU looks almost OEM from here, would love to hear this in the flesh!
    The CF looks good also. are you going to have grilles or cloth over the door speakers?
    keep it up whats next?

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  22. #21
    morgan306's Avatar
    1st Gear

    Status
    Offline
    Join Date
    May 2009
    Location
    Manston,Kent.
    Posts
    144
    What a brilliant job!
    2002 Black S3 BAM, AmD remap,Badger5 3" TIP,JR filter & heatshield,Porsche 996 Brembos with 330mm disks,KW shocks & springs,RNSE+Bose.

  23. #22
    Car Audio Enthusiast

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Pulborough, West Sussex
    Posts
    21
    Thanks!

    I am probably going to leave the speakers uncovered. I have found in the past that grilles make a difference to the sound, and as I am the only one that uses the car, I am not too worried about them getting knocked. We have an S-MAX that the wife and kid trash this is my "keep nice" car!

    Starting to sound better and better now, although I have not been able to take the car out recently due to the snow. The snow has built up against my garage door and I can't be bothered to clear it. I have sat in the car for a listen a few times though (how sad am I !)

  24. #23
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    not sad, just a pefectionsist mate.
    i prefer the stealth look myself however i have to suffer poor sound out of mine though

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  25. #24
    rasA4's Avatar
    Four Rings Mafia Specialist

    Status
    Offline
    Join Date
    Apr 2003
    Location
    Deep
    Posts
    3,096
    any updates?

    Bee Five | A4 2.4 V6 30V Tip SE | OEM S4 Alloys | S4 Bumper | S4 Leathers | HIDs| Billy's & Bachs | I Aint new to this | Hit the THANKS Button if my post is any use |Thanks!

  26. #25
    Audi A4!!!

    Status
    Offline
    Join Date
    Nov 2009
    Location
    Birmingham
    Posts
    14
    Looks great! where did you get the single din to double din converter from?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO