EM TuningAH Fabrications
Results 1 to 8 of 8
  1. #1
    MiT
    MiT's Avatar
    Work Hard, Play harder!!

    Status
    Offline
    Join Date
    Mar 2007
    Location
    Birmingham
    Posts
    269

    RMS on all 4 speakers in A3(8P)??

    Anybody know what the RMS is on each speaker in an A3 (8P), fronts and rear.

    I want to buy an amp to power all 4 speakers and a sub.

    I will be changing the stock sub, and removing the HU. Then replacing the HU with a screen that doesnt have a built in amp, hence a 5 channel amp.

    At the moment just trying make a plan. Not sure on spec off amp, but need to know RMS of speakers.

    Also I know that i can get the rear speaker channels from the red connecter that the standard sub+amp use, but want about the front speakers? Were can i give its audio signal. Any more cables in the back i can use, or do they get it from the front ISO?

    Cheers.
    A3 Sportback 2.0 TDI S-Line
    Amalfi White || Comfort Pack || Audi Sound System 10 Speakers || Interior Light Pack || Elec Lumber Support || Sat Nav || Non Smoking pack

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    Moderator

    Status
    Offline
    Join Date
    Jun 2003
    Location
    World of my own
    Posts
    9,813
    Think the speakers are all 20wrms (if that).
    You can't wire in a 5 channel amp and use the existing pre-out cabling. You'll need to run proper RCA's as there is no front pre-out connection in the boot.
    If you're changing the HU you'd want to do this anyway as the Audi cabling is really mickey mouse, and you'll need to run a seperate RCA for the sub so you can adjust it's level from the HU.
    You'll then need to run new speaker cable from the amp back to the HU in order to pick up the front speaker connections.

  4. #3
    MiT
    MiT's Avatar
    Work Hard, Play harder!!

    Status
    Offline
    Join Date
    Mar 2007
    Location
    Birmingham
    Posts
    269
    Quote Originally Posted by AndyMac
    Think the speakers are all 20wrms (if that).
    cheers

    Quote Originally Posted by AndyMac
    You can't wire in a 5 channel amp and use the existing pre-out cabling. You'll need to run proper RCA's as there is no front pre-out connection in the boot.
    does this only apply to the front speakers?

    Quote Originally Posted by AndyMac
    If you're changing the HU you'd want to do this anyway as the Audi cabling is really mickey mouse, and you'll need to run a seperate RCA for the sub so you can adjust it's level from the HU.
    You'll then need to run new speaker cable from the amp back to the HU in order to pick up the front speaker connections.
    Makes some sence, but am still a little unclear.

    In my case am installing a PC (mini-itx) in the boot. So all my audio signal will come from there.

    So amp will get its source from there. Then i tought i could use the red connecter block, as its in the boot, and save me running cables, to the rear speakers.

    But if you say so, i will need to run separate speakers cables from the amp to all four speakers then?

    I thought:
    PC (audio source) > amp > sub : 4 speakers (2 red block), 2 run some new cables to front ISO.

    I was going to run some speaker cables to the ISO block and attached them to there, this way i dont have to open the door panels. Would that work?

    Sorry for so many questions.
    And thanks for your input.
    Last edited by MiT; 8th April 2007 at 12:23.
    A3 Sportback 2.0 TDI S-Line
    Amalfi White || Comfort Pack || Audi Sound System 10 Speakers || Interior Light Pack || Elec Lumber Support || Sat Nav || Non Smoking pack

  5. #4
    5th Gear

    Status
    Offline
    Join Date
    Dec 2006
    Location
    barnsley
    Posts
    1,019
    if your going to the expense of putting an a 5 channel amplifier
    then its important you get the other bits right as well or you will not see halve the capability

    stock speakers should be changed for after market units (id reccomend focal ,rainbow,hertz)
    sound deadening products should be used to help cancel vibrations (dynamatt,skinz,damplifier pro personally id reccomend a combination of skinz and dynamatt)
    make thick wooden baffles to mount the speakers DONT USE the tinpot plastic ready made efforts THEY VIBRATE
    as for the 5 channel amp if your buying brand new then have a look at the audison lrx 5 channel amp or the e range of jl audio amps

    these are the things that take a normal system from good to great
    2003 pearlescent black s4 avant tiptronic - milltek exhaust - pre cats removed - remapped ...
    koni adjustable suspension front and rear
    alpine f1 dvi9990 -pxah990 headunit and processor - alpine d511r
    4 x focal 5ws midbass drivers - focal audiom 6w midrange - focal tce tweeters - velodyne df 12 sc servo controlled subwoofer
    3 x phoenix gold zpa 0.5 amplifiers

  6. #5
    Moderator

    Status
    Offline
    Join Date
    Jun 2003
    Location
    World of my own
    Posts
    9,813
    You can pick up the rear speakers from the red connector, but you'll have to run speaker cable to the front ISO loom (at the HU).
    you'll have to run cables from HU to PC in the boot as well, otherwise how will you control the PC?
    Definately upgrade the front components, wouldn't bother with the rears. As Dualmono says, the sound is only as good as the worst component in the system i.e. the stock front speakers.

  7. #6
    MiT
    MiT's Avatar
    Work Hard, Play harder!!

    Status
    Offline
    Join Date
    Mar 2007
    Location
    Birmingham
    Posts
    269
    Quote Originally Posted by dualmono21
    if your going to the expense of putting an a 5 channel amplifier
    then its important you get the other bits right as well or you will not see halve the capability

    stock speakers should be changed for after market units (id reccomend focal ,rainbow,hertz)
    sound deadening products should be used to help cancel vibrations (dynamatt,skinz,damplifier pro personally id reccomend a combination of skinz and dynamatt)
    make thick wooden baffles to mount the speakers DONT USE the tinpot plastic ready made efforts THEY VIBRATE
    as for the 5 channel amp if your buying brand new then have a look at the audison lrx 5 channel amp or the e range of jl audio amps

    these are the things that take a normal system from good to great
    Sounds good, but expensive. May think about it. May do this after i get the intiail setup.

    Quote Originally Posted by AndyMac
    You can pick up the rear speakers from the red connector, but you'll have to run speaker cable to the front ISO loom (at the HU).
    you'll have to run cables from HU to PC in the boot as well, otherwise how will you control the PC?
    PC will be controled via a 7" touch screen, this will connected via a USB. This USB will run from head unit, to PC via a USB extension lead.

    Quote Originally Posted by AndyMac
    Definately upgrade the front components, wouldn't bother with the rears. As Dualmono says, the sound is only as good as the worst component in the system i.e. the stock front speakers.
    Will also have to look into this.

    Also see my page for more info on pc, and also link in sig.

    http://www.m-i-t.co.uk/carpc.html

    Note: Site needs a update, as i have changed cars, and wiring diagram is wrong, as i will no longer be using a relay, or any HU, or an amp just for the sub.
    Last edited by MiT; 8th April 2007 at 23:25.
    A3 Sportback 2.0 TDI S-Line
    Amalfi White || Comfort Pack || Audi Sound System 10 Speakers || Interior Light Pack || Elec Lumber Support || Sat Nav || Non Smoking pack

  8. #7
    MiT
    MiT's Avatar
    Work Hard, Play harder!!

    Status
    Offline
    Join Date
    Mar 2007
    Location
    Birmingham
    Posts
    269
    Also anybody know the ohms on the stock speakers?

    cheers.
    A3 Sportback 2.0 TDI S-Line
    Amalfi White || Comfort Pack || Audi Sound System 10 Speakers || Interior Light Pack || Elec Lumber Support || Sat Nav || Non Smoking pack

  9. #8
    Moderator

    Status
    Offline
    Join Date
    Jun 2003
    Location
    World of my own
    Posts
    9,813
    4ohm non Bose, 2ohm Bose

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO