Concert II swap with RNS-E woe

Hi,


I'm not quite sure where this post belongs.


To cut a long story short I'm swapping a Concert II with a friends RNS-E but have run in to a couple of problems.


Current setup:


My 2008 A3:
Concert II
No Bose
No bluetooth/phone prep etc, Dension Gateway 100


Friends 2011 A3
RNS-E
Bose
Bluetooth/Ipod/Phone Prep


The RNS-E fits in mine and powers up but I realise I'm going to need to grab a few things such as a GPS arial to get it working. What else would I need to do?
I believe I also need to set a jumper for the Bose.


The problem starts when we put the Concert II in the friends vehicle. Unit doesn't power on.


Does anyone have any ideas?


Any help is appreciated.


Cheers,
Liam

Thanks for the useful reply. That sounds simple enough.

s8craig said:

Concert II+ requires a safe wire alongside the main power wire. Check on the lid of the concert and you can see in D16 the extra power cable.

Click to expand...

Would there be any issues with me taking a feed from the same harness?

Cheers