Video on the Rns-e... Could it be as easy as this?

No that's pretty much it, simple video in is not difficult on the RNS-E, if it's a MK1 RNS-E you will of course need to do a VIM hack
 
Well no VIM hack exists for a MK2, so it would have to be done by hardware to remove the speed signal from the can bus.
 
Last edited:
To be honest, at this moment in time video in motion isn't too important for now. I just wondered if the sario above could work. Assuming by the first reply, then yes it will, I don't suppose anyone has fitted one of the multimedia adaptors before and has any instructions on the easiest route?

Thanks
 
audi upgrades
They are pretty straight forward, 4 wires, +12v, gnd, CAN hi & lo all connected at the back of the nav unit and then plug in the grey connector, ony thing you might have to do is relocate the existing 3 wires in the 32 pin grey connector into the new one so AUX and VIDEO share the same 32 pin grey connector.
 
You must log in or register to reply here.

Similar threads

stevehall
Video to RNS-E
Replies
12
Views
2K
khalil
K
stevehall
RNS-E worth it?
Replies
1
Views
945
BahnStormer77
BahnStormer77
sermike75
Phone Cradle's PTT button as PTT button for SDS comands with RNS-E
Replies
0
Views
1K
sermike75
sermike75
The911SC
Freeview on RNS-E
Replies
6
Views
2K
imported_craigyjp
I
nick1973
digital tv on rns-e
Replies
6
Views
2K
cliveywolves
cliveywolves
Top
Back