Thread: 2005 3.2 re-map

Hi Sarah/Ade, having bought items from yourselves in the past, i am going to use your services again. Im about to buy a 2005 3.2 manual a3 and would like some info and pricing about the re-map and other tuning options for the afore mentioned car.

IE, is there a remap available, what are the gains (probably small), how much will it cost, and what about induction and exhaust options, etc.

Neil

Hi

At present we dont have a remap option for these...

But for exhaust front we do Milltek:
Catback £432+vat
http://www.awesome-gti.co.uk/milltek/milltekaudi.html

Induction front:
Pipercross induction kit £127+vat
http://www.awesome-gti.co.uk/pipercross.html

Hi Mate
Yes as Ade said
I did try to post earlier , but my computer crashed and wiped it off before I could post
It is not a good engine for mapping so the main gains would be the exhaust and the induction kit
Hope that helps and Ade`s little bit too?
Sarah

Originally Posted by AwesomeSarah

Hope that helps and Ade`s little bit too?
Sarah

What has Ade's little bit got to do with anything?

Originally Posted by AwesomeSarah

Hi Mate
Yes as Ade said
I did try to post earlier , but my computer crashed and wiped it off before I could post
It is not a good engine for mapping so the main gains would be the exhaust and the induction kit
Hope that helps and Ade`s little bit too?
Sarah

Do Carbonio not do a induction kit for the 3.2, or will the TT or R32 kit not fit?

The R32 carbonio physically fits to the engine but as far as i'm aware doesnt go down into the cavity behind the wheelarch.

Originally Posted by awesomeade

The R32 carbonio physically fits to the engine but as far as i'm aware doesnt go down into the cavity behind the wheelarch.

Pity, it looks like a good bit of kit.

Regarding the Milltek exhaust, is it possible to just get the back box and tail pipe assembly, or is it only available as a cat back kit?

better go for the whole system from the cat back because you will need to sleeve the original pipe work to the new 2.5'' pipe work and the more connections the more the leaks.

Regards
Peter

Peter is correct... it is possible to just get the backbox but it will need to be sleeved... we also find when the pipework changes up a size that far back the backbox can be droney.