WHEEL ADAPTERS

[nsd]

HI ALL. IVE GOT A SILVER 2005 1.9TDE SE.

AT THE MOMENT ITS WEARING BLACK 8.5X19 BBS LM WITH POLISHD LIP.
AND LOWERED 50MM ON THE FRONT AND 40MM ON THE BACK.

IM THINKING OF CHANGING THE WHEELS TO MAYBE A SET OF 997 TURBO OR AUDI Q7. THESE HAVE A PCD OF 5X130

WHAT CORRECT TYRES SHOULD THESE HAVE?

WHO AND WHERE CAN I GET THE ADAPTERS TO CHANGE MY 5X112 TO 5X130 AND HOW THICK SHOULD THE ADAPTERS BE.

 

[jwhat]

You can check the tyre size's here http://www.miata.net/garage/tirecalc.html Put in what you have at the moment and then mess about with the new size until they are nearly the same.

Dpm on sponsors on the site and they sell adaptors I think this is what you need http://www.dpmperformance.co.uk/hr-5130-716-14x15-wheel-adaptors-bolts-p-2552.html

But anyone who makes spacers will probably make adaptors too.

I've no idea on the size you need though I presume it depends on the et and the width of the new wheels.


Could you also try not to use caps lock for your whole post too please.