Monster MotorsportAH Fabrications
Results 1 to 28 of 28
Like Tree8Likes
  • 1 Post By Rhysy_Baby
  • 2 Post By Rhysy_Baby
  • 1 Post By Av4nt
  • 4 Post By Rhysy_Baby

Thread: Nice new shiny carbon replacement B-pillars and rear door triangles

  1. #1
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52

    Nice new shiny carbon replacement B-pillars and rear door triangles

    Hi guys

    Well after a lot of searching and numerous conversations I eventually found a company that would produce the full replacement carbon fibre B-pillars and the triangles on the rear doors for me.

    Sorry about the pictures... Iphone quality unfortunately.

    Here they are on my A4 DTM...

    Before
    ImageUploadedByTapatalk1390251575.877970.jpg

    ImageUploadedByTapatalk1390251589.408479.jpg

    ImageUploadedByTapatalk1390251606.458213.jpg

    ImageUploadedByTapatalk1390251620.842945.jpg

    After
    ImageUploadedByTapatalk1390251669.191737.jpg

    ImageUploadedByTapatalk1390251684.458291.jpg

    ImageUploadedByTapatalk1390251697.108926.jpg

    ImageUploadedByTapatalk1390251713.175879.jpg

    ImageUploadedByTapatalk1390251732.758727.jpg

    Hope you like them

    Rhys
    sidibear likes this.

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    Neutral

    Status
    Offline
    Join Date
    Dec 2013
    Posts
    70
    Really nice looking , where did you get theses from ?

  4. #3
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52
    Thanks. They're from a company I used abroad that does all of the carbon parts for the KTM X-Bow.

  5. #4
    4th Gear

    Status
    Offline
    Join Date
    May 2012
    Location
    Kings Lynn
    Posts
    896
    did you have to send them away to be warapped then? or can you buy them? really fancy these for mine
    Current - 2006 B7 A4 S Line Saloon 2.0T TFSI Special Edition, Unicorn stage 1 remap, Metallic Dolphin Grey, 18" TTRS Rotors, Ferrari Red front/rear Calipers, 3.5" Powerflow tailpipes, BOSE, Cupra R splitter, Chrome grille slats, S4 Mirror covers, Black/silver leather interior, Debadged, Arm rest delete, LED plate lights, Dectane LED Red/Crystal tail lights, HID 6k, RS 4 pedals, Rev D D/V, APR snub mount, NGK 7s

    Gone - 2005 B7 A4 Avant 2.0 TDI

  6. #5
    DuncVolvoTurbo's Avatar
    Neutral

    Status
    Online
    Join Date
    Sep 2013
    Location
    Dundee
    Posts
    65
    Quote Originally Posted by Av4nt View Post
    did you have to send them away to be warapped then? or can you buy them? really fancy these for mine
    Yeah, what he said! :D
    Currently on the drive:

    2005 Audi A6 (C5) 1.9TDi (130) Final Edition Avant
    1994 Volvo 850 2.3 Turbo


  7. #6
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52
    No these are full replacement parts, so unbolt yours and bolt these on :-) The B-Pillars were fine but the rear door triangles require the doors all but stripping down to get to one bolt 😳

  8. #7
    DieselJake's Avatar
    God Mode

    Status
    Offline
    Join Date
    Jun 2012
    Location
    Birmingham
    Posts
    1,339
    Wow they look ace, how were they to fit and what sort of price


    ... sensing a group buy coming on

  9. #8
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52
    As above Jake. Didn't take long, say 2 hours for everything. You just need to remove the door frames for one bolt...

    This company has been very good to be honest and the quality is second to none and put it this way the price is much more appealing than the likes of OSIR. They are also willing to produce other parts depending on interest 😃

  10. #9
    4th Gear

    Status
    Offline
    Join Date
    May 2012
    Location
    Kings Lynn
    Posts
    896
    Quote Originally Posted by DieselJake View Post
    Wow they look ace, how were they to fit and what sort of price


    ... sensing a group buy coming on
    If this turns into a group buy. I am in.com! Fancy getting the opricing and setting one up for us Dieseljake
    Last edited by Av4nt; 21st January 2014 at 19:14.
    Current - 2006 B7 A4 S Line Saloon 2.0T TFSI Special Edition, Unicorn stage 1 remap, Metallic Dolphin Grey, 18" TTRS Rotors, Ferrari Red front/rear Calipers, 3.5" Powerflow tailpipes, BOSE, Cupra R splitter, Chrome grille slats, S4 Mirror covers, Black/silver leather interior, Debadged, Arm rest delete, LED plate lights, Dectane LED Red/Crystal tail lights, HID 6k, RS 4 pedals, Rev D D/V, APR snub mount, NGK 7s

    Gone - 2005 B7 A4 Avant 2.0 TDI

  11. #10
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52
    I can have this discussion with them... It all depends on numbers really as these were one-offs. I'm sure they'd be happy to produce more.

  12. #11
    4th Gear

    Status
    Offline
    Join Date
    May 2012
    Location
    Kings Lynn
    Posts
    896
    Quote Originally Posted by Rhysy_Baby View Post
    I can have this discussion with them... It all depends on numbers really as these were one-offs. I'm sure they'd be happy to produce more.
    sorry Rhys i meant do you want to set one up for us lol... wrong person. If you ask them and they are up for a group buy im sure there will be interedt in the b7 arena for these they look brill
    Current - 2006 B7 A4 S Line Saloon 2.0T TFSI Special Edition, Unicorn stage 1 remap, Metallic Dolphin Grey, 18" TTRS Rotors, Ferrari Red front/rear Calipers, 3.5" Powerflow tailpipes, BOSE, Cupra R splitter, Chrome grille slats, S4 Mirror covers, Black/silver leather interior, Debadged, Arm rest delete, LED plate lights, Dectane LED Red/Crystal tail lights, HID 6k, RS 4 pedals, Rev D D/V, APR snub mount, NGK 7s

    Gone - 2005 B7 A4 Avant 2.0 TDI

  13. #12
    Neutral

    Status
    Offline
    Join Date
    Jan 2013
    Posts
    46
    They look awesome mate, i'd be in for a group buy if the price us right

  14. #13
    DuncVolvoTurbo's Avatar
    Neutral

    Status
    Online
    Join Date
    Sep 2013
    Location
    Dundee
    Posts
    65
    Quote Originally Posted by rooksy View Post
    They look awesome mate, i'd be in for a group buy if the price us right
    +1
    Currently on the drive:

    2005 Audi A6 (C5) 1.9TDi (130) Final Edition Avant
    1994 Volvo 850 2.3 Turbo


  15. #14
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52
    Ok I'll contact the company and see what they can offer with a group buy. If there are any other things people can think of, they are quite willing to have a go at. Think they're looking at carbon lower door blades at the moment... 😝
    Av4nt and DuncVolvoTurbo like this.

  16. #15
    DieselJake's Avatar
    God Mode

    Status
    Offline
    Join Date
    Jun 2012
    Location
    Birmingham
    Posts
    1,339
    Quote Originally Posted by Rhysy_Baby View Post
    As above Jake. Didn't take long, say 2 hours for everything. You just need to remove the door frames for one bolt...
    Sorry, posted before refreshing to see DuncVolvoTurbo's post and your reply.

    Quote Originally Posted by Av4nt View Post
    sorry Rhys i meant do you want to set one up for us lol... wrong person. If you ask them and they are up for a group buy im sure there will be interedt in the b7 arena for these they look brill
    Thank god, me and organisation don't go well together haha. Would also raise a fair bit of interest with us b6 lot as they're the same (... well I'm etleast 90% sure they are anyway).

  17. #16
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Love it, more robust then the wrapping I have on mine currently...
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  18. #17
    1st Gear

    Status
    Offline
    Join Date
    Nov 2011
    Posts
    213
    Quote Originally Posted by rooksy View Post
    They look awesome mate, i'd be in for a group buy if the price us right
    Agreed. They look damn good IMO!

  19. #18
    2nd Gear

    Status
    Offline
    Join Date
    Mar 2013
    Location
    Berkshire
    Posts
    393
    Really nice, Not sure I like the rear triangle but each to there own.

    Thou I wish the DTMs came out with a carbon fibre rear diffuser but having said that no doubt on mine it would get so damaged from stone chips stuff flinging onto it.I know there is a company in the US that supplies this. But hard to tell by the quality from a picture.

  20. #19
    DieselJake's Avatar
    God Mode

    Status
    Offline
    Join Date
    Jun 2012
    Location
    Birmingham
    Posts
    1,339
    To be honest the rear triangle is my favourite and most wanted part as mine has some form of bubbling, would obviously need both though to match it up.

  21. #20
    4th Gear

    Status
    Offline
    Join Date
    May 2012
    Location
    Kings Lynn
    Posts
    896
    Quote Originally Posted by DieselJake View Post
    To be honest the rear triangle is my favourite and most wanted part as mine has some form of bubbling, would obviously need both though to match it up.
    +1
    losirob likes this.
    Current - 2006 B7 A4 S Line Saloon 2.0T TFSI Special Edition, Unicorn stage 1 remap, Metallic Dolphin Grey, 18" TTRS Rotors, Ferrari Red front/rear Calipers, 3.5" Powerflow tailpipes, BOSE, Cupra R splitter, Chrome grille slats, S4 Mirror covers, Black/silver leather interior, Debadged, Arm rest delete, LED plate lights, Dectane LED Red/Crystal tail lights, HID 6k, RS 4 pedals, Rev D D/V, APR snub mount, NGK 7s

    Gone - 2005 B7 A4 Avant 2.0 TDI

  22. #21
    Reverse Gear

    Status
    Offline
    Join Date
    Dec 2013
    Location
    Surrey
    Posts
    25
    Nice mod Rhys, tres cool mate!!

  23. #22
    Reverse Gear

    Status
    Offline
    Join Date
    Apr 2013
    Location
    hoylake
    Posts
    6
    i got

    b pillar
    rear door triangles
    and rear boot strip

    for my DTM last year from www.argon-creative.com they are all full replacement parts ( they dont show them on the website as replacement parts you have to email them.)

    i would recommend them to anyone.

    iv still got the door triangles sitting on the side as im waiting for some warm weather to fit them lol.

  24. #23
    Rhysy_Baby's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2013
    Location
    Plymouth
    Posts
    52

    Nice new shiny carbon replacement B-pillars and rear door triangles

    Thanks for the comments guys.

    Just to keep you informed, the company are keen to take requests to manufacture items, so please let me know if there is anything you can think of so I can discuss it with them.

    I am in discussions regarding group buys... Watch this space.
    Last edited by Rhysy_Baby; 27th January 2014 at 22:43.
    bowen, Av4nt, rooksy and 1 others like this.

  25. #24
    Icey's Avatar
    Neutral

    Status
    Offline
    Join Date
    Jan 2014
    Location
    Northants
    Posts
    83
    Count me in for my a3 of the price is right .)
    "Understeer" is when you hit the fence with the front of the car.
    "Oversteer" is when you hit the fence with the rear of the car.
    "Horsepower" is how fast you hit the fence.
    "Torque" is how far you take the fence with you.
    -Yeah my signature is stolen, get over it-

  26. #25
    Neutral

    Status
    Offline
    Join Date
    Jan 2014
    Location
    Fife/Edinburgh - Scotland.
    Posts
    36
    I'm interested in a group buy, the CF parts looks great. Will keep an eye on this thread!

  27. #26
    DuncVolvoTurbo's Avatar
    Neutral

    Status
    Online
    Join Date
    Sep 2013
    Location
    Dundee
    Posts
    65
    Did anything ever happen with this?
    Currently on the drive:

    2005 Audi A6 (C5) 1.9TDi (130) Final Edition Avant
    1994 Volvo 850 2.3 Turbo


  28. #27
    Neutral

    Status
    Offline
    Join Date
    Jun 2010
    Location
    wirral/merseyside
    Posts
    53
    I'd love these for my dtm also the inside 1 by wing mirror

  29. #28
    DieselJake's Avatar
    God Mode

    Status
    Offline
    Join Date
    Jun 2012
    Location
    Birmingham
    Posts
    1,339
    Make it happen forgot about this before it was revived.

 

 

Similar Threads

  1. OEM Sub and rear door speakers loom
    By welshwoody in forum A3/S3/Sportback (8P Chassis)
    Replies: 0
    Last Post: 13th May 2013, 18:39
  2. My new Carbon b-pillars and door inserts...or is it...??
    By hatmeow in forum A3/S3/Sportback (8P Chassis)
    Replies: 3
    Last Post: 14th November 2008, 00:19
  3. new audi a3 1.8t member and owner
    By tick in forum A3/S3 Forum (8L Chassis)
    Replies: 3
    Last Post: 14th October 2005, 13:55
  4. New to the world of Audi and this forum...
    By rudyno9 in forum The Welcome Section
    Replies: 4
    Last Post: 28th April 2005, 22:08
  5. New Alpine to replace Concert
    By paul_brad in forum In-Car Entertainment
    Replies: 0
    Last Post: 16th May 2004, 18:54

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO