EM TuningSky Insurance
Results 1 to 34 of 34
  1. #1
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344

    Rear ambient lighting DIY mod.

    Well bu**er me, but it only blimmin' works, doesn't it?!

    I can't believe I actually did it right. In fairness, Quattrojames' DIY guide was a huge help.

    However, now that I've tried it, I'm not sure I want it in there. Firstly, the light fitting (bought second hand on Ebay) is the wrong colour for the roof trim. Secondly, the holes I drilled are rather untidy. Thirdly, the beautiful ice white LEDs I put in the existing light fitting only last month don't fit the replacement.

    Here's a pic of my rather unlovely handiwork




    I'll take another look at it when it's dark, and then make up my mind. If I decide it's a keeper, I'll try to tidy up the holes. and then get onto Trups for some new white LEDs.
    Last edited by jdp1962; 15th April 2013 at 19:20.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Is it hard to line up? I ordered the parts for mine today (front and rear)
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  4. #3
    ajax1976's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Location
    Fife, Scotland
    Posts
    388
    Interested to see what you think about it when its dark, personally think it was bit of waste of time and was quite disappointed with it.

  5. #4
    Tiffy's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Mar 2013
    Location
    Warwick
    Posts
    348
    oooohhhh.....interested with the night virdict too before i do mine.....
    2007 Audi A4 B7 S-Line Avant 170 TDi Special "Black" Edition
    Genuine 19" x 9 Bentley GTC 5 Spokes
    Full Interior LED Light upgrade
    Ambiant "Submarine" Interior lighting
    Seat Leon Cupra R Splitter
    LED rear NumberPlate Upgrade
    Headlight, Fog Light and Side Light White Light Upgrades
    Eibach SportLine Springs 50/40
    Privacy Glass



  6. #5
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by Tiffy View Post
    oooohhhh.....interested with the night virdict too before i do mine.....
    Don't rush to order the parts just yet. There may be a completed unit going spare. I didn't get round to installing it tonight, but will tomorrow, then decide.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  7. #6
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by rizzini7 View Post
    Is it hard to line up? I ordered the parts for mine today (front and rear)
    Not too bad (although I still managed to get it slightly askew!). The gap between the two switches on the light fitting is 70mm. The gap between the LEDs is 20mm. So each hole needs to be 25mm in from the switch.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  8. #7
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Lets see how much I can mess mine up. I had enough trouble with the passat washers
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  9. #8
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by rizzini7 View Post
    Lets see how much I can mess mine up. I had enough trouble with the passat washers
    Wow! You mean you could be even more fumble-fingered and useless than me?!
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  10. #9
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    Yeah this looks like a barrel of laughs think im going to give it a whirl, push boat out and do both front and rears.

  11. #10
    A4_MaJiK's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Leicester, UK
    Posts
    789

    My Social Networking

    Add A4_MaJiK on Facebook Visit A4_MaJiK's Instagram Channel
    Haven't got a proper night shot but HTH...




    Audi A4 B7 3.0TDI S-Line Sprint Blue
    ~ MTEC DRLs & Sidelights ~ 8000k D1S ~ 19" A6 Le Mans Edition Wheels ~ Eibach Wheel Spacers (5mm F/15mm R) ~ Rear Ambient Lighting ~
    ~ UK Legal Pressed Plates ~ Full Interior LED Lighting ~ Rear Numberplate LED Lights ~ LCR Front Splitter ~

  12. #11
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    A4 MAJIK what size hole did you drill?

  13. #12
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by Palfy View Post
    A4 MAJIK what size hole did you drill?
    The correct size is 7mm. I used a 6.5mm, cos I haven't got a 7mm bit.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  14. #13
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    nice one jdp thank you.

  15. #14
    A4_MaJiK's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Leicester, UK
    Posts
    789

    My Social Networking

    Add A4_MaJiK on Facebook Visit A4_MaJiK's Instagram Channel
    I also used 6.5mm as I don't have a 7mm at home. Could of got one from work but I was quite happy with the diameter and think 7mm would have been slightly too much.

    Audi A4 B7 3.0TDI S-Line Sprint Blue
    ~ MTEC DRLs & Sidelights ~ 8000k D1S ~ 19" A6 Le Mans Edition Wheels ~ Eibach Wheel Spacers (5mm F/15mm R) ~ Rear Ambient Lighting ~
    ~ UK Legal Pressed Plates ~ Full Interior LED Lighting ~ Rear Numberplate LED Lights ~ LCR Front Splitter ~

  16. #15
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    Thanks MAJIK

  17. #16
    1st Gear

    Status
    Offline
    Join Date
    Aug 2011
    Posts
    151
    I used 6.5 when I did my front one - how are folk drilling? from the "inside" thro to the outside perhaps? I'm just wondering if that's why the hole looked a little ragged?

    I went thro with a 3 mm bit having first centre-punched the recess on the inside - then used the 6.5 from outside to inside - the result was very clean. Don't know if this is of any help, but sharing anyway. Mike.

  18. #17
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    Yeah thats a great help mike ill remember that when i do mine. Has everyone LED the interior lights to white as well? do the bulbs need to be canbus?

  19. #18
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by Mike_B View Post
    I used 6.5 when I did my front one - how are folk drilling? from the "inside" thro to the outside perhaps? I'm just wondering if that's why the hole looked a little ragged?

    I went thro with a 3 mm bit having first centre-punched the recess on the inside - then used the 6.5 from outside to inside - the result was very clean. Don't know if this is of any help, but sharing anyway. Mike.
    When I did the fronts, I drilled from the inside out, because the guides are there to show where the holes should be. When I did the rears, I drilled from the outside in, because I had to work out the locations myself, andf this was easier to do on the outside.

    In both cases, I drilled a guide hole with a 2.5mm bit, then gradually opened it out.

    I don't have a counter-sinking bit, so my efforts to tidy up the holes are somewhat lumpen and oafish.
    Last edited by jdp1962; 16th April 2013 at 13:20.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  20. #19
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    Quote Originally Posted by Palfy View Post
    Yeah thats a great help mike ill remember that when i do mine. Has everyone LED the interior lights to white as well? do the bulbs need to be canbus?
    My interior lights are all LEDs. No warning errors, so I'm assuming the interior lights aren't covered by the bulb monitoring system. If in doubt, send a private message to forum member T8ups. He supplies the bulbs, and is a great source of all the technical knowledge you will ever need on LED lighting.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  21. #20
    jdp1962's Avatar
    Grumpy Old Man

    Status
    Online
    Join Date
    May 2003
    Location
    Cruising on a mountain of torque
    Posts
    5,344
    UPDATE: Have been outside in the dark to study the effect of the rear ambient lighting, and it's a bit of a non-event really, and certainly not really worth paying out more to get a set of white LEDs for the reading lights. I've put the original, which is already converted to white LED, back in, so if anyone is still interested in doing this mod, but hasn't yet acquired the parts, send me a PM. I have a working unit surplus to requirements, just needs a little cosmetic enhancement from someone with a little bit of skill, dexterity and patience.
    A4 3.0TDi SE Quattro Auto. Factory-fit: RNS-E/bluetooth; F/R parking sensors; full leather/heated front seats; cruise. Retrofit: Remap; Eibach 30mm lowering springs, RS4 RARB; MTEC drilled/grooved discs; 18" RS4 alloys; VW fan washers; Kinetic Digitizor DAB; Blackvue DR380 camera; front armrest; ambient lighting; white LED lights; autodim mirror; Cupra splitter; S-Line door blades; tints; UK pressed plates; MFSW; SDS; TPMS; LED Taillights and DRLs.


  22. #21
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Hey mate, did you mod the rear ambient module before fitting like in woorlords guide??
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  23. #22
    A4_MaJiK's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Leicester, UK
    Posts
    789

    My Social Networking

    Add A4_MaJiK on Facebook Visit A4_MaJiK's Instagram Channel
    Quote Originally Posted by rizzini7 View Post
    Hey mate, did you mod the rear ambient module before fitting like in woorlords guide??
    I did the mod before fitting.

    Audi A4 B7 3.0TDI S-Line Sprint Blue
    ~ MTEC DRLs & Sidelights ~ 8000k D1S ~ 19" A6 Le Mans Edition Wheels ~ Eibach Wheel Spacers (5mm F/15mm R) ~ Rear Ambient Lighting ~
    ~ UK Legal Pressed Plates ~ Full Interior LED Lighting ~ Rear Numberplate LED Lights ~ LCR Front Splitter ~

  24. #23
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Does it just make it so the connector has clearance
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  25. #24
    A4_MaJiK's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Leicester, UK
    Posts
    789

    My Social Networking

    Add A4_MaJiK on Facebook Visit A4_MaJiK's Instagram Channel
    Quote Originally Posted by rizzini7 View Post
    Does it just make it so the connector has clearance
    Yea, think there may be a bit of slack to play with too on one of the wires.

    Audi A4 B7 3.0TDI S-Line Sprint Blue
    ~ MTEC DRLs & Sidelights ~ 8000k D1S ~ 19" A6 Le Mans Edition Wheels ~ Eibach Wheel Spacers (5mm F/15mm R) ~ Rear Ambient Lighting ~
    ~ UK Legal Pressed Plates ~ Full Interior LED Lighting ~ Rear Numberplate LED Lights ~ LCR Front Splitter ~

  26. #25
    ajax1976's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Location
    Fife, Scotland
    Posts
    388
    Unless you want someone sitting in the middle of the rear seat to have a nice red glow to their head and face this really is a pointless mod.

    Mine is coming out and going to fit into the underside of the centre armrest to light the rear cubby and handbrake in the centre console.

  27. #26
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Don't have passengers in the back anyway
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  28. #27
    ajax1976's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Location
    Fife, Scotland
    Posts
    388
    So what is the point of it? It doesn't even light the seat in mine. Only effect is two red dots when you look at the rear light:-)

  29. #28
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Is it really that naff. Got the parts inc. spare light now anyway so might give it a go
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  30. #29
    ajax1976's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Location
    Fife, Scotland
    Posts
    388
    If you've got the bits you might as well try it, maybe its just mine that's crap.

    Best analogy I can think of, its like driving with full beams on in day light. Look at the headlight and you'll see they're on but look around you, they make no difference.

  31. #30
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Well after messing the holes up on both lights I'm not gonna do the rear. The front holes aren't to bad so gonna watch out for cheap replacement unit and do them again. So now have a spare ambient module Bnib if anyone else wants to have a go.
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

  32. #31
    crazy88's Avatar
    Loving the anonymity

    Status
    Offline
    Join Date
    Nov 2009
    Location
    West Yorkshire
    Posts
    4,727
    I think I'm gonna do what ajax suggested, and use mine to light under/in/around my armrest. I did consider the back, but I think his analogy is spot on. I think it would just annoy the kids more than anything.


  33. #32
    D2NY G's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Apr 2011
    Posts
    984
    how do these look at night?

    might be interested as i love the front ones

  34. #33
    palfy86's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    Nottinghamshire
    Posts
    237
    Quote Originally Posted by rizzini7 View Post
    Well after messing the holes up on both lights I'm not gonna do the rear. The front holes aren't to bad so gonna watch out for cheap replacement unit and do them again. So now have a spare ambient module Bnib if anyone else wants to have a go.
    How did you manage to mess the holes up?? Im thinking about doing the mod so id like to know what not to do lol.

  35. #34
    rizzini7's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Jun 2011
    Location
    Warham, Norfolk, United Kingdom
    Posts
    654
    Just me and power tools don't mix.
    Dolphin Grey 2005 3.2fsi Quattro 6-speed manual A4 Avant S-line, Two tone Leather, Pipercross panel filter, Genuine RS6 style 18" Alloys, Cupra R Lip, Piranha Grooved and dimpled Brakes, Eibach 30mm springs, B5 Front Cups, Rs4 RARB, HEL Braided Brake Hoses, Engine covers, Rs4 Grill, Rs4 style fog grills, Lamin-x'd head, fog and tail lights, Adaptive Xenons, Q5 rear wiper, S4 spring clips, Heated Passat Washer jets, DIS and cruise control


    Now have genuine VCDS in North Norfolk

 

 

Similar Threads

  1. A4 Avant - Rear ambient light installation.
    By quattrojames in forum A4/A4 cabriolet/S4 forum(B6 chassis)
    Replies: 13
    Last Post: 19th February 2011, 16:49
  2. Ambient Light Mod Question....
    By fran-s3 in forum A3/S3 Forum (8L Chassis)
    Replies: 51
    Last Post: 10th March 2010, 07:14
  3. B7 Ambient Light Mod
    By The_Golfather in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 16
    Last Post: 6th October 2009, 19:59
  4. Interior Ambient Light Mod? Where can I find it?
    By Joe90k in forum A3/S3/Sportback (8P Chassis)
    Replies: 10
    Last Post: 14th June 2009, 12:02
  5. Ambient light mod
    By razza1 in forum General Technical / How To
    Replies: 8
    Last Post: 27th May 2009, 17:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO