Problem with central locking, electric mirrors and door iluminations

deian3387 · Feb 19, 2013

Hi, i have two fault codes stored in the conv ECU,

01811 voltage for door controller driver side (j386) faulty
01812 voltage for door controller pass side faulty

central locking, electric mirrors and the iluminations for both the front doors don't work.
Fuses are all O.K.

Has anyone had an issue like this?

NHN · Feb 19, 2013

I know its both doors, but check the door hinge rubbers, wires break in there.

The fact both are down, does make you think its elsewhere, but whats 5 minutes going to hurt you checking.

Check fuses.

hades- · Feb 19, 2013

as above very common
check the thin wires they can be broke but still look ok give them a tug

deian3387 · Feb 19, 2013

Thanks for the replies guys.. checked the driver door harness and found that i had a live missing. Re checked the fuse that fed this wire and found a break in the spade of the fuse and not the fuse wire. so when i looked at the fuse in the first place it looked ok.
So replaced fuse and everything is ok

hades- · Feb 19, 2013

glad you got it sorted.

Search

Search

Problem with central locking, electric mirrors and door iluminations

deian3387

Registered User

NHN

Retrofitter - Audi - VW - Skoda - Seat

hades-

Well-Known Member

deian3387

Registered User

hades-

Well-Known Member

Similar threads