2.0 T fault code

[hades-]

any ideas cam follower ok and changed fuel filter changed
?

[h=2]18725/P2293/008851 - Fuel Pressure Regulator Valve (N276): Mechanical Malfunction[/h][h=4]Possible Symptoms[/h] Malfunction Indicator Light (MIL) ON Power Loss [h=4]Possible Causes[/h] Fuel Pressure too Low Intake Camshaft Failure [h=4]Possible Solutions[/h] Check Measuring Values for Fuel Pressure Check for bent/squeezed Fuel Lines Check Fuel Pressure System for Leaks Check Fuel Filter & Filter in Fuel Pump Check Fuel Quantity supplied by the Fuel Pump [h=4]Special Notes[/h] When found in 2.0l TFSI: Check Fuel Pressure Rest of World (RoW) check TPI 2014143, the Intake Camshaft might have a worn out Fuel Pump Cam. North American Region (NAR) check TSB 2015153 (01-09-03 > 15-10-01 > 15-10-02), the Intake Camshaft might have a worn out Fuel Pump Cam. North American Region (NAR) check TSB 2018183 (20-08-01) and verify the High Fuel Pressure Sensor (G247) Part Number Retrieved from "18725/P2293/008851 - Ross-Tech Wiki" Category: Fault Codes

[h=5]Categories[/h] Main Page Diagnostic Procedures Common Procedures Fault Codes Retrofitting Immobilizer [h=5]Meta[/h] Log in http://www.aapexshow.com/

 

[hades-]

bump

 

[hades-]

right its had a new HPFP and follower
cam sensor fuel line that was a bit kinked (prob happend when hpfp was replaced
fuel filter

 

[GarJE]

What is your measured fuel pressure?