Problems!!!!

C

Chrisd1983

Registered User

Joined

Sep 23, 2007

Messages

48

Reaction score

0

Points

6

Location

Chester

• Aug 22, 2012

• #1

Hi guys,

Got a problem with my 2.0 Tdi 140 bhp, it has been suffering with the hesistation problem between 1400-2000 rpm. Now it has got worse when accelerating there is a cloud of black smoke until after 2000rpm every so often then the power is back!

I've cleaned the air filter and the egr valve, but I noticed on the egr that the part which connects to the cooler pipe the valve doesnt open, its connected to a rod which is connected to a motor.....Any ideas?

Thanks

 

U

ukdan

Registered User

Joined

Apr 1, 2010

Messages

72

Reaction score

0

Points

6

Location

SWINDON / WILTSHIRE

• Aug 22, 2012

• #2

Anti shudder valve maybe?
Get it scanned for fault codes.

 

C

Chrisd1983

Registered User

Joined

Sep 23, 2007

Messages

48

Reaction score

0

Points

6

Location

Chester

• Aug 22, 2012

• #3

Yea its going in Friday, but I want an idea of what it could be before it goes in. The fact the valve part which connects to the cooler pipe doesnt operate.

 

O

Oddie

Registered User

Joined

Nov 28, 2011

Messages

181

Reaction score

15

Points

18

Location

NULL

• Aug 22, 2012

• #4

The anti shudder valve is also referred to as the inlet manifold flap. It is supposed to open when you open the throttle allowing air into the vehicle and it is supposed to close when you turn off the car to prevent air getting in and ensure that the car shuts off properly.

If this isn't opening at all then i imagine this will cause no end of problems.

 

C

Chrisd1983

Registered User

Joined

Sep 23, 2007

Messages

48

Reaction score

0

Points

6

Location

Chester

• Aug 22, 2012

• #5

Well just scanned the car with my cheapy eBay software and this is what I got.......