Badger5Chris Nott
Page 2 of 4 FirstFirst 1234 LastLast
Results 41 to 80 of 136
Like Tree6Likes

Thread: K04 Hybrid progress

  1. #41
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Intergrated connecting pipe trimmed as it was in the way



    Pics of the ATP intercooler



    AVLO likes this.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #42
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Stage 3 SouthBend daily clutch with light weight single mass fly wheel




    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  4. #43
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    ah so you went with the SB
    mines only just bedding in after 2K
    have you got a link for the FMIC

  5. #44
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    ah so you went with the SB
    mines only just bedding in after 2K
    have you got a link for the FMIC
    Ok so the link to the ATP FMIC as seen in the pics above is here however I have had mine anodised in black and this will be up for sale soon as it didn't fit behind the DTM bumper. Looking for around £500
    The new intercooler i'll be using is The Evolution Racewerks Competition Series FMIC link is here
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  6. #45
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    any progress ?

  7. #46
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    any progress ?
    Yeah the car is back together now, I was just test driving it before I take it to MRC to get mapped. I will be posting up the rest of the pics soon.

    First impressions:-
    The clutch weight is definitely heavier, it doesn't make any weird chatter noises so that’s good. The lightweight flywheel allows the car to rev very freely and acceleration seems effortless.
    I am most impressed with hybrid K04's spool time, it's really quick and I can defiantly feel more grunt at the top end where the ko3 used to really run out of puff. I can't wait to get this mapped, i'm talking to MRC about dropping in some forged rods so I can really push the boundaries, I think it would be rude not to
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  8. #47
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    do the rods or bang there gonna bend aroiund 320ish

  9. #48
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    do the rods or bang there gonna bend aroiund 320ish
    I'm assuming thats 320lbft ? are we talking from experience?
    Out of interest what is your engine code?
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  10. #49
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    BGB with a BWA HEAD and shric cams
    valves and springs to match

  11. #50
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    New Evolution Racewerks intercooler installed, This is soo much better than the ATP front mount in terms of fitment & quality however it does costs alot more













    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  12. #51
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    The convertion is complete i've booked the car in for mapping on the 24th with MRC. I will post up the results soon
    Last edited by solaris; 12th October 2011 at 12:28.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  13. #52
    On my 3rd A4! RS4 next???

    Status
    Offline
    Join Date
    Oct 2005
    Location
    Nottingham
    Posts
    159
    What have you spent on your final chosen parts?

    Good job by the way.

    Chris

  14. #53
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    any trimming of the bumper ?
    and are MRC going for a big turbo file or a live tune ?
    u mentioned rods b4 JBS have got some in stock aswell at £350 inc vat

  15. #54
    Fahim's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Wanstead
    Posts
    280
    Enjoyed reading this thread. Some good work going on! Cant wait to see the final figures.

    Quick question. Can that intercooler not be used on the 2.0 TDI's? I don't see why not since everythings the same except we have single smic and i believe yours is dsmic?
    Things to do: Lower on coilovers, spacers, front end respray and a full correctional detail!

  16. #55
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    any trimming of the bumper ?
    and are MRC going for a big turbo file or a live tune ?
    u mentioned rods b4 JBS have got some in stock aswell at £350 inc vat
    The bumper was already trimmed from when I was fitting the ATP intercooler however I rekon you can fit the ER without any trimming. I'm probably going to do the rods next year with regards to the map I think MRC build a custom map for all cars they tune. This is all done live on the dyno, they will be adding a rev limiter in 1st gear kind of like lauch control and a few other things such as a tad more fuel on the overun so the unburnt fuel pops when you lift off the throttle.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  17. #56
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    post yout graphs when ypu have them
    im looking for a new tune

  18. #57
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Craig Cull likes this.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  19. #58
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    very good
    so you went stage 2 insted of a live tune ?
    very good numbers tho
    what did they charge ?

  20. #59
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Well its not stage 2, they call it stage 2 as i was using a k04 and not a big frame turbo ..but it was a full custom tune mapped live... I was asked if I wanted to go for more power/torque as the turbo was very confortable but i bottled it, I know the conrods wont take the power. I'm going to drive it for a while to see how it does and may take it back for a little more.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  21. #60
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    yeah you did right **** bending a rod
    iv got another just finshed
    so im in talks tmoro with stattler they use revo
    this ones no rods or fmic so see what it can get

  22. #61
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    yeah you did right **** bending a rod
    iv got another just finshed
    so im in talks tmoro with stattler they use revo
    this ones no rods or fmic so see what it can get
    I spoke to Revo about writing a custom map for mine but they refused to do so. Anyway I'm really happy with the work MRC have done, I cannot recommend them enough.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  23. #62
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    oh rite stattler say they have done a few
    gona download the map and sent it to revo HQ and let them write a map
    who do MRC use for maps

  24. #63
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by bez101 View Post
    oh rite stattler say they have done a few
    gona download the map and sent it to revo HQ and let them write a map
    who do MRC use for maps
    They dont use anybody, they write the maps in house, every car that they tune has an individual map writen for it on thier own dyno. That's why I highly rate these chaps.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  25. #64
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Without playing the video, what's the figures?
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  26. #65
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    So the stndard DTM made 217BHP
    with the k04 and the other harware keeping the same map it made 254BHP
    and once mapped it made 364BHP / 477 NM Torque
    Last edited by solaris; 25th October 2011 at 21:18.
    AVLO likes this.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  27. #66
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Nice numbers, bet that drives nicely lovely looking car by the way, love the colour!
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  28. #67
    Avantageous

    Status
    Offline
    Join Date
    Apr 2010
    Location
    Hampshire
    Posts
    337
    So jealous. Makes me really want to do this to mine now. Especially with the pops on the overrun :D

    Did you upgrade your HPFP?

    What would you say was your total spend for this project? Maybe if you could break it down that would be awesome.

  29. #68
    solaris's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Slough, Berkshire
    Posts
    404
    Quote Originally Posted by ChrisFurlong View Post
    So jealous. Makes me really want to do this to mine now. Especially with the pops on the overrun :D

    Did you upgrade your HPFP?

    What would you say was your total spend for this project? Maybe if you could break it down that would be awesome.
    S3 injectors £140 eBay.de
    034 Silicone intake pipe £70
    2nd hand S3 Turbo from breakers £400
    Refurb turbo & Hybrid conversion £600
    Autotech HPFP internals £240
    Rai downpipe inc s3 turbo flange £200
    plus around £100 for other clamps, hoses etc
    Evolution Racewerks Competition FMIC £800
    ==================================
    So approx £2550 excluding mapping & clutch upgrade
    However if your happy running your side mounted intercoolers and don’t need for the turbo to be a hybrid then it tots up to approx £1150 and you should be good for 330~350bhp.

    My car has been held back on bhp & torque (as discussed earlier it was a mutual decision between me and MRC) until the rods are done, I may even throw in the exhaust and inlet cams from an S3. (I am jealous of Bez and his Schrick cams!) Once this has been done I’m hoping to hit 400bhp/400lbft..the numbers are becoming an obsession.
    Craig Cull likes this.
    If it's not longitudinal and it's not Quattro..it's not an Audi
    VCDS (VAG-COM) HEX-CAN USB cable carrying member
    2005 A4 DTM 2.0 TFSi Quattro :364Bhp/477NM - Mapped by MRC Tuning
    Hybrid K04 Project ongoing (link to Build thread)

    DMFW + Clutch For Sale



  30. #69
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    tell me about it takes over you
    iv just ordered a devils own kit for a full boot install
    so that should smooth the fueling out
    only thing stopping us for the big bhp power is the stupid fueling

  31. #70
    Avantageous

    Status
    Offline
    Join Date
    Apr 2010
    Location
    Hampshire
    Posts
    337
    Quote Originally Posted by solaris View Post
    S3 injectors £140 eBay.de
    034 Silicone intake pipe £70
    2nd hand S3 Turbo from breakers £400
    Refurb turbo & Hybrid conversion £600
    Autotech HPFP internals £240
    Rai downpipe inc s3 turbo flange £200
    plus around £100 for other clamps, hoses etc
    Evolution Racewerks Competition FMIC £800
    ==================================
    So approx £2550 excluding mapping & clutch upgrade
    However if your happy running your side mounted intercoolers and don’t need for the turbo to be a hybrid then it tots up to approx £1150 and you should be good for 330~350bhp.

    My car has been held back on bhp & torque (as discussed earlier it was a mutual decision between me and MRC) until the rods are done, I may even throw in the exhaust and inlet cams from an S3. (I am jealous of Bez and his Schrick cams!) Once this has been done I’m hoping to hit 400bhp/400lbft..the numbers are becoming an obsession.
    Wow, thats actually very cheap. I'd be very happy with 330bhp, very happy indeed. So the stock SMIC and a stock S3 turbo sounds the way to go for me. Suppose I can always upgrade to a FMIC and a hybrid in the future. Hmm... time to start looking I guess! I just want that popping on the overrun!!

    As for 400bhp, that would be mad. But a lot of fun though. Keep posting with your updates! And if you could get some videos of the car running that would be awesome.

  32. #71
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Does the stock clutch handle that increase in power and torque?
    Don't forget to add labour charges ad well Chris unless you have the skills.

    Does sound very tempting, missing the supra power....
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  33. #72
    Avantageous

    Status
    Offline
    Join Date
    Apr 2010
    Location
    Hampshire
    Posts
    337
    Quote Originally Posted by razza1 View Post
    Does the stock clutch handle that increase in power and torque?
    Don't forget to add labour charges ad well Chris unless you have the skills.

    Does sound very tempting, missing the supra power....
    I don't have the skills, but my step dads the mechanic, so between us we should be able to find the skills to do it.

    Mind you, I wouldn't mind just have your setup. 280BHP sounds great.

  34. #73
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Can definately feel the difference from my old one which wasn't mapped, and although not as quick as the supra, much more easier to drive in the wet and don't miss the twitchy back end...

    Seems like you can get the performance of an s4 without the running and servicing costs, for a considerable amount less than an s4....this is definately something to bear in mind...
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  35. #74
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    Quote Originally Posted by razza1 View Post
    Can definately feel the difference from my old one which wasn't mapped, and although not as quick as the supra, much more easier to drive in the wet and don't miss the twitchy back end...

    Seems like you can get the performance of an s4 without the running and servicing costs, for a considerable amount less than an s4....this is definately something to bear in mind...
    ]
    you can get the power but been honest
    its just not in the s4 league

  36. #75
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    Why, because how the power is delivered? And sound obviously....
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  37. #76
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    if you lived near me id let you drive mine and an s4
    you would get what i mean

  38. #77
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    is yours quattro bez? and do you have the RS4 RARB?

    Never driven the S4 so can't compare, obviosuly the power delivery would be different with the n/a vs the turbo kick in, is the turbo lag too great when you go to the K04 or does it spool up pretty quickly?

    Would have thought that with that power vs the 344BHP of the V8, but without the weight of the 4.2 engine at the front, it would handle better with the right suspension set up...?

    (where are you based by the way, might have to visit a site soon...? )
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  39. #78
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    anyone got power graphs of the S4 to compare it to?
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

  40. #79
    bez101's Avatar
    Yorkshire & Humber Rep.

    Status
    Offline
    Join Date
    Jul 2008
    Posts
    8,492
    sheffield
    fwd
    rse rarb

  41. #80
    razza1's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Reading - Berkshire
    Posts
    1,244
    how much of that difference is due to the quattro though, is it engine difference, or ride/driveability difference you talk about?
    07 2.0T SLine SE V2 Quattro, Full Milltek with hi-flow sports cat, APR Stage 2+ 280BHP/325lb/ft, APR HPFP, K&N panel, S4 alloys, Spacers, Black Optics, Eibachs, RS4 grill and fogs, Fog tints, RS4 ARB, RS4 Gearstick, LCR splitter, Black Calipers, Drilled discs, Debadged, Colour DIS, Bose, Adaptive Xenons/DRL, Black/Silver Audi Exclusive leather, Audi Carbon inlays, carbon difuser/B pillars, RNS-E+/Bluetooth, Cruise, Int/ext light packs, Rain/light sensors, mudflaps, LED plate/side/boot/interior

 

 
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO