Problems connecting to Module 46 Central Conv.

[graymarki]

Yep - I've been through the same strife as Zod and SteveB.

[TIRO]

Hi anyone with a VAG COM maybe able to help me with this problem

I have a registered VAG COM and standard serial cable running VAG-COM version 311-2 software

I cannot connect to Module 46 on my Audi S3, I have tried other modules and they appear to be working fine. I have tried adjusting the settings in the com port and recycling the ignition but to no avail. I have also tried version 404-0 too

All I am trying to do is add the “Horn honk on arm”

Any advice you can offer is gratefully received.

Cheers
Tim

This must have worked in past versions because RAM helped me change the lock at 15mph, one button push driver side unlock and two pushes passenger + boot

[peteA3tdi]

i can not get Module 46 on my S3 try recoding module 35 just make a note of the old code just in case, it worked on my car

[peteA3tdi]

sorry it maynot be 35 my crap top has packed up so i cannot check there is a c/locking module you can get in but like i said just make a note of the old code(it's best to do this on any recode) by the way the bleep is crap you can only just here it

[TIRO]

Thanks Pete I'll give it a whirl and see.....

I have heard about the beep but give a bloke a tool and he'll want everything it can do!

[scoTTy]

I've set the beep, one-touch and auto-locking on lots of A3's and TTs so it can be done.

I find the beep spot on. It's not too loud that it annoys the neighbours in the night but it is really useful for confirming all doors etc are properly closed.

[TIRO]

Yep couldn't agree more

Got it sorted now thanks.

I used to walk away from the car and have that mental block "did i lock the car?" Not anymore