MisterD
May 17th, 2003, 10:27
I want to compare my results to see if my charge pressure is being controlled properly. I have logged the readings from measuring block 025. It may not be the same block for all cars - the outputs should be measured in:
ms ms ms %
(so you may just be able to scan through the blocks untill you find an output that corresponds)
The test should be done with engine at 80 degrees plus, no a/c on or other loading such as lights, etc. (but don't bother disconnecting fans and stuff)
Basically coast along holding 2k revs, then floor it from 2-3k and repeat about 3 or 4 times, in 2nd gear or 3rd gear (please state which when you do).
If you could upload your logged file here or just email it to me I would be very grateful indeed. I have attached my log file for you to open in vag-scope and see what I mean. Rename the file with a .csv extension instead of .txt
Thanks in advance!
ms ms ms %
(so you may just be able to scan through the blocks untill you find an output that corresponds)
The test should be done with engine at 80 degrees plus, no a/c on or other loading such as lights, etc. (but don't bother disconnecting fans and stuff)
Basically coast along holding 2k revs, then floor it from 2-3k and repeat about 3 or 4 times, in 2nd gear or 3rd gear (please state which when you do).
If you could upload your logged file here or just email it to me I would be very grateful indeed. I have attached my log file for you to open in vag-scope and see what I mean. Rename the file with a .csv extension instead of .txt
Thanks in advance!