Air con problems on my 2008 sline avant 2litre tdi. I was told the air con pressure switch was at fault and it was an easy fix. Got the part from Audi with a new "O" ring as well, looked to fit the part and it looks to me like it will be a bumper off job. Anybody done this before and got any pics of the job as a guideline for me to follow I would be very grateful. thanks in advance.
air con problems
- Thread starter mully1
- Start date
You may be able to get access by just moving one side of the bumper, I did a quick write-up here http://www.audi-sport.net/vb/a6-s6-...nt-bit-rebuild-repair-thread.html#post2100852
Thanks for that I was reading the write up yesterday, very interesting, it was a good read you have missed your calling you should be writeing how to manuals for all us Audi nuts. Thanks again
gupsterg
Registered User
I have read posts where people have done it via just removing trim below bonnet locking mechanism if they have small nimble hands.
That sensor you refer to I think is A/C Pressure/Temperature Sensor (G395), Link:- Audi Portal: Sensors Diagnostic . Audi A6 4F (2005- ). G395 ÐпиÑание
That sensor you refer to I think is A/C Pressure/Temperature Sensor (G395), Link:- Audi Portal: Sensors Diagnostic . Audi A6 4F (2005- ). G395 ÐпиÑание
