HID Adjustment Error

[TYphoon GB]

Having fitted the new bulbs thought I would align them. WRONG!

It all started well with VCDS (Reg Copy) and Module 55

Adjustment 04 Group 01 Good

Set up headlights

Then GO
or rather NOT

Now lit up ERROR in Group 1 and 2

Tried Adaption back to default and re-code which all worked
Motors run all seems to work but errors still.

Headlamps not adjusted 01539 error Makes sense as I never got to 002 GO.

Any thoughts?

 

[TYphoon GB]

Might drop this on the VCDS forum...

 

[andyt1967]

There is a very specific procedure on RossTech, and I found if you didn't follow it exactly it error'ed like this! I had to go back to the beginning and follow it precisely. Though on checking it looks like you followed this procedure...so i'm probably not helping.

http://wiki.ross-tech.com/wiki/index.php/Audi_A6_(4B)_Headlight_Aim_Control_(Dynamic_Light)

 

[TYphoon GB]

Appreciated. Think I did it to the letter. Looks like the motor is running but not cycling up down. Headlamp out then.