brake light warning light on

2.8 30v

Registered User
Joined
Aug 25, 2013
Messages
147
Reaction score
20
Points
18
Location
berkshire
I've checked all the bulbs all ok then if found that the high level brake light has been wired into the n/s/r brake I have disconnected the high level brake light and have no power to it I have check the wiring from the multiplug behind the n/s/r 1/4 panel trim to the high level brake light and all seams ok
when I connect it all back up and remove the o/s/r bulb the warning light on the dash goes out has anyone got any ideas on what I can do to put the warning out or were to start looking for the fault
the car is a 1997 b5 avant
 
Last edited:

Similar threads