Monster MotorsportJMB Retrofits
Results 1 to 8 of 8
  1. #1
    1st Gear

    Status
    Offline
    Join Date
    Jan 2013
    Location
    Norwich
    Posts
    127

    Cupra R splitter

    There seems to be many cars that you can get this type of front splitter to fit, does fitting it to a FL front bumper require much hackin' & bashin'?

    Thanks.
    '92 VW Corrado 20vt
    '98 Audi A4 Avant TDi 110 - EGR delete...
    '08 BMW 320d Edition M-Sport Touring

    'You screw up just this much, you'll be flying a cargo plane full of rubber dog sh*t out of Hong Kong'

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    Bradderz_1988's Avatar
    Dont replace it, Upgrade it !!

    Status
    Online
    Join Date
    Aug 2010
    Location
    Westhoughton, Bolton
    Posts
    3,116
    No you just trim the 2 middle clips of the cupra splitter down by roughly 20mm nut and bolt and rivet it along the bumper where the original lugs are. With a original bumper if you want to go back to stock look for whatever reason you can just replace the lower part of the bumper, ive just fitted one to mine but have S4 bumper fitted looks miles better.

    never seen one fitted to a stock bumper though il have a look now as you got me thinking now lol

    pics -

    1999 Audi A4 1.8T Quattro Sport - Volcano Black

    Mods - Frankenturbo F21 Kit - 3" MAF - Saab Reds - THS Decat - Non Res Milltek - ECS Crank Pulley - 034 Snub + Bracket/Gbox Mounts - 1Z/S2 Clutch + Flywheel - 007p - ICM + EVAP Delete - PFR6Q Plugs - S4 B6 345mm Brakes - 300mm Rear Brakes - Goodridge Hoses - LCR Splitter -S4 Bumbers + Skirts/Mouldings - OEM Xenons - Apikol Diff mounts - Polytek'd Rear Diff Mount
    To do/planned -Eibach pro's - GT2871/76R + FMIC + ME7 (maybe) + Engine/stroker Build

  4. #3
    Bradderz_1988's Avatar
    Dont replace it, Upgrade it !!

    Status
    Online
    Join Date
    Aug 2010
    Location
    Westhoughton, Bolton
    Posts
    3,116
    1999 Audi A4 1.8T Quattro Sport - Volcano Black

    Mods - Frankenturbo F21 Kit - 3" MAF - Saab Reds - THS Decat - Non Res Milltek - ECS Crank Pulley - 034 Snub + Bracket/Gbox Mounts - 1Z/S2 Clutch + Flywheel - 007p - ICM + EVAP Delete - PFR6Q Plugs - S4 B6 345mm Brakes - 300mm Rear Brakes - Goodridge Hoses - LCR Splitter -S4 Bumbers + Skirts/Mouldings - OEM Xenons - Apikol Diff mounts - Polytek'd Rear Diff Mount
    To do/planned -Eibach pro's - GT2871/76R + FMIC + ME7 (maybe) + Engine/stroker Build

  5. #4
    1st Gear

    Status
    Offline
    Join Date
    Jan 2013
    Location
    Norwich
    Posts
    127
    Quote Originally Posted by Bradderz_1988 View Post
    Cheers for the link, it looks ok, you definitely get the sense that on a FL stock bumper it was added and on the S4 bumper it looks more at home.

    Does look good on yours
    '92 VW Corrado 20vt
    '98 Audi A4 Avant TDi 110 - EGR delete...
    '08 BMW 320d Edition M-Sport Touring

    'You screw up just this much, you'll be flying a cargo plane full of rubber dog sh*t out of Hong Kong'

  6. #5
    Bradderz_1988's Avatar
    Dont replace it, Upgrade it !!

    Status
    Online
    Join Date
    Aug 2010
    Location
    Westhoughton, Bolton
    Posts
    3,116
    1999 Audi A4 1.8T Quattro Sport - Volcano Black

    Mods - Frankenturbo F21 Kit - 3" MAF - Saab Reds - THS Decat - Non Res Milltek - ECS Crank Pulley - 034 Snub + Bracket/Gbox Mounts - 1Z/S2 Clutch + Flywheel - 007p - ICM + EVAP Delete - PFR6Q Plugs - S4 B6 345mm Brakes - 300mm Rear Brakes - Goodridge Hoses - LCR Splitter -S4 Bumbers + Skirts/Mouldings - OEM Xenons - Apikol Diff mounts - Polytek'd Rear Diff Mount
    To do/planned -Eibach pro's - GT2871/76R + FMIC + ME7 (maybe) + Engine/stroker Build

  7. #6
    1st Gear

    Status
    Offline
    Join Date
    Sep 2011
    Location
    Sunny Bangor. N.Wales.
    Posts
    288
    ooooh, i like the look of that!!!! much better than a golf VR6... that i was possibly thinking of.
    2000, A4 2.5Tdi Quattro.
    Tinted, 3600WATTSLoud

  8. #7
    4th Gear

    Status
    Offline
    Join Date
    May 2012
    Location
    Kings Lynn
    Posts
    885
    Ordering mine this month whoop
    Current - 2006 B7 A4 S Line Saloon 2.0T TFSI Special Edition, Unicorn stage 1 remap, Metallic Dolphin Grey, 18" TTRS Rotors, Ferrari Red front/rear Calipers, 3.5" Powerflow tailpipes, BOSE, Cupra R splitter, Chrome grille slats, S4 Mirror covers, Black/silver leather interior, Debadged, Arm rest delete, LED plate lights, Dectane LED Red/Crystal tail lights, HID 6k, RS 4 pedals, Rev D D/V, APR snub mount, NGK 7s

    Gone - 2005 B7 A4 Avant 2.0 TDI

  9. #8
    Chriscooke's Avatar
    Clueless!

    Status
    Offline
    Join Date
    Mar 2012
    Location
    Taunton
    Posts
    403
    If anyone fits one of these to a standard bumper please post up pictures, looks great on the s4 bumpers.

 

 

Similar Threads

  1. Cupra R splitter fitted to S-line bumper
    By mattandrew in forum A3/S3/Sportback (8P Chassis)
    Replies: 32
    Last Post: 18th March 2013, 00:18
  2. Installing a Cupra Lip splitter?
    By Raggy A4 in forum A3/S3 Forum (8L Chassis)
    Replies: 2
    Last Post: 31st December 2008, 21:13
  3. LEON CUPRA R SPLITTER
    By S3-Chris in forum A3/S3 Forum (8L Chassis)
    Replies: 23
    Last Post: 10th September 2008, 20:17
  4. Cupra R Splitter fitment to S3
    By 1animal1 in forum A3/S3 Forum (8L Chassis)
    Replies: 74
    Last Post: 30th April 2008, 22:20
  5. Cupra R Splitter Fitting on S3
    By Pat in forum A3/S3 Forum (8L Chassis)
    Replies: 2
    Last Post: 12th January 2008, 14:17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO