******!cracked sump!

[tonya4]

while changing my front arb i noticed a small crack in the sump,about 1/4 inch long.Is there anything I can use for a temp repair?Am thinking something like jb weld?
thanks in advance
tony

 

[PAULF]

I've fixed a cracked/holed (aluminium)sump by riveting an aluminium plate onto it, using plenty of two part rubberised sealant between them.

If it's a small crack, file a small groove along the crack to give your filler material some purchase, and fill it with your JB weld or similar.

It'll be fine for a long while!

 

[tonya4]

cheers for the reply mate,am gonna get some stuff in a bit,and some fresh oil.
tony

 

[Bradderz_1988]

Chemical metal and apply over the crack and about an inch around the crack to patch it over.

 

[tonya4]

all fixed now,JB weld and new oil,so all good!
thanks for the help
tony

 

[B5 BIKER]

Can this JB weld be used on the outside of the sump or do I still have to take it off

 

[Paradox1]

Cant see why not

 

[tonya4]

Can this JB weld be used on the outside of the sump or do I still have to take it off

I didn't take mine off,just cleaned it up with a wire brush,then p80 paper,then cleaned any dirt off with thinners.

tony

 

[B5 BIKER]

Cheers lads
maillot give it a go and see