ok so as i cant find ANY decent exhuasts that dont cost circa £500 im wondering if i can use this item, and then use a 2.5" pipe from jetex to connect to the join up by the transmision were it connects from the down pipe. then buy a decat and downpipe else were,
Audi A4 quattro 8D 2.4/2.6/2.8/2.5TDI S/Steel Jetex Exhaust Sys 42-H9PTR 94-00 | eBay
i understand its for a v6 engine but surely the rest of the exhuast after the down pipes on the v6 is the same as the single,
looking at the picture i get a y pipe, of course i wont need that although i might intergrat that in to use a exhaust cut out, but thats for another project/day.
also on the question of exhaust wrap. are you able to wrap the hot side of the turbo with the normal stuff you can buy ie
1" X 50 ft Titanium Exhaust Header Heat Wrap | eBay
states 2000.f direct heat and 3000f radiant, what temps does the turbo get to? thinking not 2000f? as i want to try and reduce under bonnet temps alot to keep temps down as and when i remap and upgrade turbo, fuelling etc
, is it worth wrapping the exhaust right ti the back box? and also as its 2" i was thinking split it in to two 1" strips to make it go slightly further, cheers