Central Locking flash signal

[gmx]

ANyone have a wiring diagram handy for the flash/arm signals?

I just removed an aftermarket alarm and they spliced into these wires coming from the CLU.
I have no idea where they cut and I can't even find the suitable wires/harness underneath the kick panel.

 

[aragorn]

Surely the original wiring all must still be present and correct, or the central locking wouldnt work?

If its jsut the flash output they've removed then try in the rear quarter panel area where the central locking pump is fitted.

 

[gmx]

It's been disconnected/spliced in at the point underneath the dash/kick panel harness. I disconnected them (from CLU) the alarm but can't find the original connections nor a harness with similar colour/gauge wiring.

So I have no idea where they go.

 

[gmx]

bump..... desperate for help.
Been sitting like this for 3 months now.

If anyones got diagrams or information I could take a look at myself, I'd appreciate it..

 

[aragorn]

Get yourself a copy of Elsawin!

 

[gmx]

Have a known good torrent linky?